Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White micro-ATX case with fine mesh panels and rear fan

NZXT

NZXT CC-H31FW-01 H3 Flow Micro-ATX PC Case White

SKU CH-P4BR-2R8N4 MPN CC-H31FW-01

A micro-ATX chassis with mesh panels and a ventilated PSU shroud, fitting full-size GPUs up to 377 mm and supporting 280 mm front and 240 mm top radiators

  • TypeATX Mid Tower
  • ColorWhite
  • Space-saving micro-ATX footprint fits high-performance parts
  • Ultra-fine mesh panels and PSU shroud maximize airflow while filtering dust
  • Pre-installed 120 mm rear fan provides exhaust airflow out of the box
  • Supports 280 mm front and 240 mm top radiators for versatile liquid cooling
  • Holds full-size GPUs up to 377 mm without front fans

Compact micro-ATX case for high-performance builds

The NZXT H3 Flow is a white micro-ATX chassis that fits full-size components in a space-efficient footprint. It targets builders who want powerful hardware without a large tower taking up desk space. Buyers who need E-ATX motherboard support or multiple 3.5-inch drive bays should look elsewhere.

GPU clearance depends on front cooling configuration

Maximum graphics-card length is 377 mm with no front fans, 352 mm with front fans installed, and 317 mm when a front radiator and fans are fitted. Choose your cooling layout first, then verify your card fits the corresponding limit.

Mesh panels and a pre-installed rear fan manage

Ultra-fine steel mesh on the front, top and sides plus a ventilated PSU shroud deliver high airflow while filtering dust. One 120 mm rear exhaust fan is included; the case supports up to seven fans and radiators up to 280 mm front and 240 mm top for scalable cooling.

Kohokohdat

  • Space-saving micro-ATX footprint fits high-performance parts
  • Ultra-fine mesh panels and PSU shroud maximize airflow while filtering dust
  • Pre-installed 120 mm rear fan provides exhaust airflow out of the box
  • Supports 280 mm front and 240 mm top radiators for versatile liquid cooling
  • Holds full-size GPUs up to 377 mm without front fans

Tekniset tiedot

BrandNZXT
Part NumberCC-H31FW-01
TypeATX Mid Tower
ColorWhite
Lähetyspaino0.45 kg
Pakkauksen mitat25 × 25 × 25 mm

Kysymyksiä tästä tuotteesta

How long a graphics card can I install if I also want a front radiator and fans?

With a 280 mm front radiator and its fans fitted, the maximum GPU length is 317 mm, so choose a card at or below that measurement.

What radiator sizes do the front and top mounts support?

The front mount takes a 280 mm radiator and the top mount takes a 240 mm radiator, letting you run liquid cooling in both positions.

What fan sizes fit the front, top, bottom and rear positions?

The front and top accept two 140 mm fans each, the bottom takes two 120 mm fans, and the rear comes with one pre-installed 120 mm fan.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.