Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 360mm AIO cooler with three 120mm fans, square pump head featuring infinity mirror RGB ring, braided tubes

NZXT

NZXT Kraken X73 RL-KRX73-01 360mm liquid cooler

SKU CH-DZN8-5BPX7 MPN RL-KRX73-01

A 360 mm all-in-one liquid cooler with three 120 mm fluid-dynamic-bearing fans, a rotatable infinity-mirror pump head and CAM software control for Intel LGA 1700 and AMD AM4 sockets

  • TypeLiquid Cooling System
  • Block CompatibilityIntel Socket LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 /
  • Block Dim.80 x 80 x 55 mm
  • Block MaterialCopper & Plastic
  • Radiator Size394.00 x 121.00 x 27.00 mm
  • Radiator MaterialAluminum

Fan Size 3 Fan Slots (120mm)

Color Black

Model Kraken X73

Näytä 1 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Adjustable pump-head orientation keeps the logo upright without re-mounting
  • 10% larger infinity-mirror ring delivers brighter RGB illumination
  • CAM software integration enables precise fan and pump control
  • Aer P120 fluid-dynamic-bearing fans run 21 to 36 dBA while moving up to 73.11 CFM
  • Nylon-braided ultra-low-evaporation tubing resists kinks and permeation over time

360 mm AIO RGB liquid cooler

The NZXT Kraken X73 RL-KRX73-01 is a 360 mm all-in-one liquid cooler with a rotating infinity-mirror pump head. Three Aer P120 fans push up to 73.11 CFM at 2000 RPM while noise stays between 21 and 36 dBA. CAM software controls pump speed, fan curves and RGB lighting.

Suits Intel LGA 1700 and AMD AM4 builds

Fits Intel sockets from LGA 1150 to LGA 2066 plus AMD AM4 and Threadripper when a separate bracket is sourced. Builders who need Threadripper sTRX4 support must obtain the extra bracket themselves. Cases without room for a 394 mm radiator or a 400 mm tube run should look at smaller coolers.

394 mm radiator length decides fit

The aluminium radiator measures 394 mm long, 121 mm wide and 27 mm thick, so the chassis must clear that length plus fan depth. If the case top or front panel cannot accommodate a 360 mm radiator stack, this cooler will not install.

Kohokohdat

  • Adjustable pump-head orientation keeps the logo upright without re-mounting
  • 10% larger infinity-mirror ring delivers brighter RGB illumination
  • CAM software integration enables precise fan and pump control
  • Aer P120 fluid-dynamic-bearing fans run 21 to 36 dBA while moving up to 73.11 CFM
  • Nylon-braided ultra-low-evaporation tubing resists kinks and permeation over time

Tekniset tiedot

BrandNZXT
SeriesKraken X73
ModelRL-KRX73-01
TypeLiquid Cooling System
Block CompatibilityIntel Socket LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150
Intel Core i9 / Core i7 / Core i5 / Core i3 / Pentium / Celeron
AMD Socket AM4 / sTRX4*, TR4*(*Threadripper bracket not included)
AMD Ryzen 7 / Ryzen 5 / Ryzen 3 / Ryzen 9 / Threadripper
Block Dim.80 x 80 x 55 mm
Block MaterialCopper & Plastic
Radiator Size394.00 x 121.00 x 27.00 mm
Radiator MaterialAluminum
Fan Size3 Fan Slots (120 mm)
Fan Dim.120 x 120 x 26mm
Bearing TypeFluid Dynamic Bearing
Fan RPM500 - 2,000 + 300 RPM
Fan Air Flow18.28 - 73.11 CFM
Fan Noise21 - 36 dBA
Fan Connector4-pin PWM
ColorBlack
Tube Dim.Length: 400mm
Tube MaterialUltra-low Evaporation Rubber with Nylon Braided Sleeve
FeaturesDESIGN: With a re-designed cap and larger infinity mirror ring LED, the new Kraken X allows for adjusting the orientation of the pump head to fit without affecting the direction of the logo
BIGGER AND BRIGHTER: 10% bigger infinity mirror cap allows for more vivid RGB and a rotating cap accommodates re-orienting the logo no matter the direction the cooler is installed
BETTER CONTROL: Full CAM integration allows you to manage your Kraken’s performance with precision
INCREDIBLE PERFORMANCE: The Aer P radiator fans feature a chamfered intake and fluid dynamic bearing that provides silent
Lähetyspaino2.16 kg
Pakkauksen mitat475 × 180 × 147 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 394 mm by 121 mm radiator fit my case front panel?

Measure the front panel clearance; the radiator is 394 mm long, 121 mm wide and 27 mm thick, and needs three 120 mm fan slots plus room for the 400 mm tubes to bend without kinking.

Which mounting bracket do I use for an LGA 1700 socket?

The kit includes brackets for LGA 1200, 115x, 2011, 2066 and AM4; for LGA 1700 you must request the separate bracket from the manufacturer before installation.

Do the Aer P120 fluid-dynamic-bearing fans need lubrication later?

No, the sealed fluid dynamic bearings are maintenance-free; only clean dust from the radiator fins and fan blades periodically to keep airflow at 18.28–73.11 CFM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.