Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White 120mm PWM case fan with nine blades and eight addressable RGB LEDs visible through clear side windows

NZXT

NZXT RF-R212S-WF 120mm PWM ARGB case fan

SKU CH-MRX0-4735B MPN RF-R212S-WF

120 mm white PWM fan delivers 70.67 CFM airflow and 3.7 mmH₂O static pressure at 2,400 RPM with 8 addressable RGB LEDs and fluid dynamic bearing

Class White

Size 120 mm

  • 120mm white fan delivers 70.67 CFM airflow for efficient cooling
  • 7 mmH₂O static pressure pushes air through radiators and dense mesh
  • PWM control up to 2400 RPM balances performance and 33.05 dBA noise
  • 8 addressable RGB LEDs with clear side windows illuminate every angle
  • Fluid dynamic bearing rated for 60000 hours of reliable operation

White 120 mm PWM ARGB fan

The NZXT RF-R212S-WF is a 120 mm case fan finished in white with nine blades shaped for high static pressure. It connects through a standard PWM 4-pin header and a 5 V addressable RGB connector, so fan speed and lighting can be managed from motherboard software or an NZXT Control Hub. The unit suits builders who want coordinated illumination and reliable airflow in a single-slot form factor.

Sustained-load behaviour

At the rated 2,400 RPM the fan delivers 70.67 CFM of airflow and 3.7 mmH2O of static pressure while producing 33.05 dBA of noise. The fluid-dynamic bearing and anti-vibration corners keep acoustic output stable during long sessions, and the blade geometry limits turbulence when pushing air through radiators or dense mesh. Buyers who need higher airflow at lower noise will find the single-fan ceiling restrictive.

Build quality and connectors

Fluid-dynamic bearings are rated for 60,000 hours of operation, and the frame includes anti-vibration corners to reduce resonance transferred to the chassis. Eight addressable RGB LEDs sit behind clear side windows, providing side-visible lighting without extra diffusers. The dual-cable layout — PWM plus 5 V ARGB — requires two motherboard or hub headers, so systems with limited header count may need a splitter or controller.

Kohokohdat

  • 120mm white fan delivers 70.67 CFM airflow for efficient cooling
  • 7 mmH₂O static pressure pushes air through radiators and dense mesh
  • PWM control up to 2400 RPM balances performance and 33.05 dBA noise
  • 8 addressable RGB LEDs with clear side windows illuminate every angle
  • Fluid dynamic bearing rated for 60000 hours of reliable operation

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How loud is the 33.05 dBA fan when it runs continuously at 2400 RPM all day?

At full speed the fan produces 33.05 dBA, a level comparable to a quiet library, so it remains unobtrusive during extended operation.

Does my motherboard need both a 4-pin PWM header and a 5 V ARGB header to use this fan?

Yes, the fan requires a 4-pin PWM connector for speed control and a separate 5 V ARGB connector for the eight addressable RGB LEDs.

Will the 3.7 mmH₂O static pressure work with an older radiator that has dense fins?

The 3.7 mmH₂O static pressure rating is designed to push air through restrictive radiators and dense mesh, so it should perform well with older high-fin-density radiators.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.