Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OEM Industries

OEM Industries 2410RL-04W-S19 60mm 3-pin CPU cooler

SKU CH-7461-82AN3

A 60 mm ball-bearing fan spinning at 4000-4499 rpm delivers 20-25 cfm airflow at 20-25 dBA over a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Efficient cooling with 20 to 25 CFM airflow
  • Quiet operation at 20 to 25 dBA noise level
  • Reliable ball bearing for long service life
  • Standard 3-pin connector fits common headers
  • Compact 60 mm size suits tight builds

Product Identity

The OEM Industries 2410RL-04W-S19 is a 60 mm, 3-pin cooling fan designed for compact CPU air coolers or case ventilation. It suits builders maintaining legacy systems, small-form-factor chassis or industrial equipment where a low-profile, ball-bearing fan is required.

Capacity and Headroom

At 4000–4499 rpm the fan delivers 20–25 cfm of airflow while producing 20–25 dBA of noise. This output is adequate for low-TDP processors or auxiliary airflow, but it runs out quickly on modern mid-range or high-end CPUs that demand higher static pressure or greater volume.

Upgrade Context

The unit replaces worn or noisy 60 mm 3-pin fans in existing coolers or enclosures. The jump is worthwhile when the original sleeve-bearing fan has failed or become audible; it is not a substitute for a larger heatsink assembly or a PWM-controlled cooler on current platforms.

Kohokohdat

  • Efficient cooling with 20 to 25 CFM airflow
  • Quiet operation at 20 to 25 dBA noise level
  • Reliable ball bearing for long service life
  • Standard 3-pin connector fits common headers
  • Compact 60 mm size suits tight builds

Tekniset tiedot

Model2410RL-04W-S19
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Kysymyksiä tästä tuotteesta

Will the 60mm 3-pin fan fit the same mounting holes as my existing 60mm cooler?

The unit is a 60mm square frame with standard 60mm mounting centres, so it aligns with the four screw holes used by most 60mm coolers and cases.

How can I confirm the 2410RL-04W-S19 is spinning at the rated speed after installation?

Connect the 3-pin header to a motherboard fan header and monitor RPM in BIOS or a hardware utility; the fan should report between 4000 and 4499 rpm under load.

Does the box include mounting screws or a 3-pin to 4-pin adapter, or must I buy them separately?

The package contains only the fan unit itself; mounting screws and any adapter cables are not included and must be sourced separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.