Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Ten black 60 mm 4-pin ball-bearing fans in a pack

OEM Industries

OEM Industries 2415KL-04W-B86 60mm 4-pin fan 10 pack

SKU CH-M453-D4E38

Ten 60 mm 4-pin ball-bearing fans deliver up to 7000 rpm and 70-75 CFM airflow at 45-50 dBA noise

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Ten fans in one pack simplify multi-slot builds
  • 60 mm frame fits compact chassis and tight clearances
  • Four-pin PWM connector enables precise speed control via motherboard
  • Ball bearing design extends operating life under continuous load
  • 7000 rpm delivers 70 to 75 CFM airflow for focused cooling

60 mm 4-pin fan multipack

This pack contains ten 60 mm DC12 V fans with four-pin connectors and ball bearings. They are suited for system builders who need multiple compact coolers for chassis ventilation or component heatsinks. The black frames and absent LEDs keep the appearance neutral. Each unit is the NMB 6038 model 2415KL-04W-B86 rated at 1.65 A.

Check connector count and mounting holes

Verify that your motherboard or fan controller provides four-pin headers for each fan you intend to install. Confirm the chassis or heatsink has 60 mm mounting points with the correct screw spacing. Ensure the 12 V supply can deliver the total current draw for the quantity you plan to run.

Replaces single 60 mm three-pin fans

The four-pin interface adds PWM control that three-pin units lack, so speed can be managed more precisely. The ten-pack quantity suits a full case refit or a small production run. Buyers who need larger diameters, higher static pressure or RGB lighting should look elsewhere.

Kohokohdat

  • Ten fans in one pack simplify multi-slot builds
  • 60 mm frame fits compact chassis and tight clearances
  • Four-pin PWM connector enables precise speed control via motherboard
  • Ball bearing design extends operating life under continuous load
  • 7000 rpm delivers 70 to 75 CFM airflow for focused cooling

Tekniset tiedot

Model2415KL-04W-B86
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Kysymyksiä tästä tuotteesta

What comes in the 10-pack and is anything else needed to install them?

The pack contains ten 60 mm ball-bearing fans with 4-pin connectors. No extra cables or adapters are included, so each fan plugs directly into a 4-pin header on the motherboard or fan controller.

The listing shows a single model 2415KL-04W-B86 — are there different speed or airflow versions to choose from?

Only this model is offered. It runs at over 7000 rpm and delivers 70 to 75 cfm at 45 to 50 dBA, so there is no lower-speed or higher-airflow variant in the pack.

What does the 70–75 cfm rating mean once the fan is mounted in a case?

At full speed the fan moves 70 to 75 cubic feet of air per minute through a 60 mm frame, providing strong spot cooling for tight spaces such as small-form-factor builds or GPU heatsinks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.