Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 80mm square axial fan with three-wire connector

OEM Industries

OEM Industries 3112KL-04W-B69 80mm 2 Ball CPU cooler

SKU CH-QPSK-7GMPH

80 mm dual-ball-bearing fan delivers 50-55 CFM at 4000-4499 RPM with a 3-wire 12 V connection

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing Type2 Ball
  • Power Connector3 Wires
  • LEDNo
  • 80 mm fan delivers 50–55 CFM airflow for case cooling
  • Dual ball bearing rated for 40 000 hours of continuous operation
  • 12 V 0.58 A three-wire connector supports PWM speed control
  • 45–50 dBA noise level balances performance and acoustics
  • Compact 80×80 mm square frame fits standard case mounts

Compact 80 mm square axial cooler

The OEM Industries 3112KL-04W-B69 is a 12 V DC axial fan built for case and CPU cooling in tight spaces. Its 80 mm square frame fits standard mounting holes and the three-wire connector reports speed to the motherboard. The unit ships new in black with no illumination.

Dual-ball bearing thermals and acoustics

Dual ball bearings support a speed range of 4000 to 4499 rpm, delivering 50 to 55 cfm of airflow at a noise level of 45 to 50 dBA. Current draw is 0.58 A at 12 V, keeping power use low while the bearing design resists wear in continuous operation.

Three-wire speed monitoring only

The bundled three-wire lead provides tachometer feedback so the system can adjust fan curves automatically. No LED lighting, PWM control or mounting hardware beyond the fan body is included, so builders needing variable voltage control or extra screws must source them separately.

Kohokohdat

  • 80 mm fan delivers 50–55 CFM airflow for case cooling
  • Dual ball bearing rated for 40 000 hours of continuous operation
  • 12 V 0.58 A three-wire connector supports PWM speed control
  • 45–50 dBA noise level balances performance and acoustics
  • Compact 80×80 mm square frame fits standard case mounts

Tekniset tiedot

Model3112KL-04W-B69
ColorBlack
TypeFan only
Fan Size80mm
Bearing Type2 Ball
Power Connector3 Wires
LEDNo

Kysymyksiä tästä tuotteesta

How do I install the 3-wire connector on the 3112KL-04W-B69 and which step is often missed?

Plug the 3-wire connector into a 12 V fan header on the motherboard; the step often missed is setting the header to PWM or DC mode in BIOS so the tachometer wire reports speed correctly.

What maintenance will the 2-ball bearing in the 3112KL-04W-B69 need later?

The dual ball bearing is sealed for life; no lubrication is required, but dust should be blown out of the 80 mm blades every few months to keep airflow near the 50–55 CFM rating.

At what point does the 3112KL-04W-B69 hit its thermal or noise limit under sustained load?

At full 12 V the fan runs 4000–4499 RPM and produces 45–50 dBA; that acoustic level is the first limit reached during continuous operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.