Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OEM Industries
40 mm sleeve-bearing fan runs on 12 V at 0.07 A with a two-wire connector
The OEM Industries 4020H12S is a 40 mm sleeve-bearing fan designed for tight spaces in small-form-factor builds or as a replacement cooler on legacy hardware. It runs on 12 V and draws 0.07 A through a simple two-wire power connection. No LED lighting is included, keeping the unit plain for utilitarian installations. The black finish blends with most chassis interiors.
The fan connects directly to any 12 V two-pin header or adapter, so it needs no PWM control or additional controller hardware. Its 40 mm frame fits narrow mounting points where larger fans cannot sit, freeing up room around compact motherboards or low-profile coolers. Builders who need variable speed control or a three-pin tachometer signal should look elsewhere, as this model provides only fixed-voltage operation.
The sleeve bearing keeps running noise modest at idle but may become audible over time as the lubricant ages. Power consumption stays at 0.07 A, adding negligible load to the system’s 12 V rail. Thermal performance suits light-duty airflow tasks such as chipset heatsinks or memory modules rather than high-wattage CPU cooling.
| Model | 4020H12S |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Sleeve Bearing |
| Power Connector | 2 Wires |
| LED | No |
The fan draws 0.07 A at 12 V, so sustained current remains at that level.
The sleeve bearing runs at a low 12 V 0.07 A rating, keeping operational noise minimal during extended use.
A standard 12 V two-pin fan header supplies the required voltage and ground for the 4020H12S.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?