Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120mm square fan with two-pin power connector

OEM Industries

OEM Industries 4710NL-04W-B50 120mm 2-Pin Fan

SKU CH-HM8M-RDE1B

A 120 mm ball-bearing fan with a 2-pin power connector for case or heatsink cooling

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • 120mm frame fits standard mounting points
  • Ball bearing reduces friction for consistent rotation
  • 12 V / 0.74 A rating matches common fan headers
  • Two-pin connector provides simple power delivery
  • Black finish suits low-profile case builds

120 mm ball-bearing case fan

The OEM Industries 4710NL-04W-B50 is a 120 mm square frame fan built with a ball bearing for continuous operation. It connects through a standard two-pin header and draws point seven four amps at twelve volts. The black housing contains no lighting and is intended as a direct replacement for NMB 12025 units in chassis or heatsink applications.

Two-pin power connector requirement

This cooler uses a two-wire, two-pin plug that supplies constant twelve-volt power without pulse-width-modulation speed control. Builders whose motherboards or fan controllers provide only three-pin or four-pin headers will need an adapter or a dedicated two-pin source. The fan runs at full speed whenever powered, so it suits systems that do not require variable RPM.

Ball bearing airflow and acoustics

The ball bearing design sustains steady airflow over long periods with minimal friction increase. At the rated current the motor draws modest power while delivering consistent static pressure through heatsink fins. Expect a constant audible hum at full voltage; systems needing silent or thermally managed operation should consider speed-controlled alternatives.

Kohokohdat

  • 120mm frame fits standard mounting points
  • Ball bearing reduces friction for consistent rotation
  • 12 V / 0.74 A rating matches common fan headers
  • Two-pin connector provides simple power delivery
  • Black finish suits low-profile case builds

Tekniset tiedot

Model4710NL-04W-B50
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Kysymyksiä tästä tuotteesta

What does the 12V 0.74A rating mean once the fan is installed in a PC?

The fan will draw up to 0.74 amps from the 12 volt rail, consuming roughly nine watts while running at full speed.

How does the 2-pin power connector limit control of the 4710NL-04W-B50?

A 2-pin connector supplies constant voltage, so the fan always spins at its fixed maximum speed with no PWM or voltage regulation.

What clearance does the 120mm by 25mm frame need to mount in a case?

The square frame measures 120 millimetres on each side and is 25 millimetres thick, requiring that much open space at the mounting point.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.