Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 70mm square CPU fan with 3-pin connector

OEM Industries

OEM Industries AFB0712VHA 70mm 12V .27A 3-Pin CPU cooler

SKU CH-5YKX-2EB7Y

A 70 mm ball-bearing fan delivering 12 V and .27 A through a 3-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 70 mm square frame fits compact CPU sockets
  • 12 V .27 A draw keeps power use low
  • Ball bearing supports continuous operation
  • 3-pin connector enables motherboard speed control
  • 10 mm slim profile clears low-profile cases

Delta 70mm 12V CPU Cooler

This OEM Industries cooler is a 70mm square fan with a 10mm profile that mounts directly on a processor heatsink. It runs on 12 volts and draws 0.27 amps through a three-pin power connector. The ball-bearing motor and black frame are built for continuous operation inside a chassis. No LED lighting is included.

Suitable for compact builds and replacement jobs

This unit suits builders who need a low-profile 70mm fan for a tight CPU cooler stack or a small-form-factor case. It is not for buyers who want a complete heatsink assembly with heatpipes, nor for systems that require PWM speed control via a four-pin header. High-static-pressure radiator setups should look elsewhere.

70mm 3-pin 12V .27A ball-bearing spec

The single specification that decides fit is the 70mm by 10mm frame with a three-pin 12V 0.27A ball-bearing motor. Verify the motherboard header supplies three-pin voltage control and that the mounting holes match a 70mm square pattern before ordering.

Kohokohdat

  • 70 mm square frame fits compact CPU sockets
  • 12 V .27 A draw keeps power use low
  • Ball bearing supports continuous operation
  • 3-pin connector enables motherboard speed control
  • 10 mm slim profile clears low-profile cases

Tekniset tiedot

ModelAFB0712VHA
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Kysymyksiä tästä tuotteesta

How do I install the AFB0712VHA 70mm fan and which step is often missed?

Mount the 70mm square frame using the four corner holes, connect the 3-pin plug to a 12V motherboard header, and verify the PWM signal wire is seated so speed control works.

What maintenance will the AFB0712VHA need over time?

The ball bearing is sealed; periodically blow dust from the 70mm blades and check that the 0.27A current draw stays steady — no lubrication is required.

What limit appears first when the AFB0712VHA runs continuously at 12V?

Sustained operation at 0.27A makes the ball bearing the first wear point; monitor for rising vibration or rpm drop as the grease ages.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.