Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 45mm square blower fan with 3-pin connector

OEM Industries

OEM Industries BM4515-04W-B59 45mm Blower Fan 12V 0.25A 3-Pin

SKU CH-F5ZS-R5H75

A 45 mm DC blower with ball bearing, 12 V 0.25 A draw and a three-pin connector for projector or printer cooling

  • ColorBlack
  • TypeFan only
  • Fan Size45mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 45 mm blower fits tight projector or printer chassis
  • Ball bearing extends service life in continuous operation
  • 12 V 0.25 A draw keeps power demand low
  • Three-pin connector enables speed monitoring by the host
  • NMB 4515 design targets focused airflow for small enclosures

Compact 45mm blower for tight spaces

The OEM Industries BM4515-04W-B59 is a 45mm DC blower designed for projector printers and similar compact equipment. Its small footprint suits builds where a standard axial fan will not fit. The three-pin connector provides basic speed reporting without PWM control.

Ball-bearing motor runs on 12V 0.25A

The blower draws 0.25A at 12V through a three-wire lead. Ball bearings reduce friction for consistent airflow in continuous operation. No LED lighting is fitted, keeping the unit suitable for professional or industrial environments.

Mounts directly to 45*15mm cut-outs

Installation requires a 45mm by 15mm opening and a three-pin header capable of supplying 12V. The blower format exhausts air through a focused outlet, freeing surrounding space that a radial fan would occupy. Ensure the target device accepts a 4515-size blower before purchase.

Kohokohdat

  • Compact 45 mm blower fits tight projector or printer chassis
  • Ball bearing extends service life in continuous operation
  • 12 V 0.25 A draw keeps power demand low
  • Three-pin connector enables speed monitoring by the host
  • NMB 4515 design targets focused airflow for small enclosures

Tekniset tiedot

ModelBM4515-04W-B59
ColorBlack
TypeFan only
Fan Size45mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Kysymyksiä tästä tuotteesta

How do I install the 45mm blower fan using the 3-pin connector?

Align the three pins with the motherboard or controller header, press straight down until the latch clicks, and route the wires so the blower exhaust faces the heatsink fins — the common mistake is plugging the connector in offset by one pin.

What maintenance will the ball-bearing blower need over time?

The ball bearing is sealed and does not require lubrication; if airflow drops, remove dust from the 45mm impeller and housing with compressed air — replacement is only needed if the bearing becomes noisy or the fan stops spinning.

At what point does the 12V 0.25A blower hit its thermal limit during sustained use?

The blower draws a constant 0.25 A at 12 V, so its own heating stays low; the practical limit appears when the component it cools can no longer transfer heat into the 45×15 mm airstream, causing exhaust temperatures to rise.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.