OEM Industries
OEM Industries Delta 12038 EFB1212VHE 12V 0.72A 120mm CPU cooler
120 mm ball-bearing case fan runs at 12 V drawing 0.72 A with a three-wire connector
- ColorBlack
- TypeFan only
- Fan Size120mm
- Bearing TypeBall
- LEDNo
- 120 mm fan moves air efficiently for CPU cooling
- Ball bearing design extends operational life under load
- 12 V 0.72 A power draw keeps energy use low
- Three-wire three-pin connector enables speed monitoring
- Black finish blends with standard case aesthetics
Compact 120 mm DC fan
This OEM Industries Delta 12038 EFB1212VHE is a 120 mm square fan built for CPU air-cooling applications. It runs on 12 V DC and draws 0.72 A, using a three-wire, three-pin connector for speed reporting. The black frame and ball-bearing design suit standard 120 mm mounting points.
12 V 0.72 A power rating
The single specification that decides fit is the 12 V 0.72 A electrical rating combined with the three-pin connector. A motherboard header or fan controller must supply exactly 12 V and be able to deliver at least 0.72 A, while also reading the tachometer signal on the third wire. Mismatched voltage or insufficient current will prevent reliable operation.
Builders needing a direct 12 V replacement
This unit suits technicians replacing an identical Delta 12038 EFB1212VHE in existing hardware where the mounting holes, voltage and connector match. It is not for builders who need PWM speed control, larger airflow figures, integrated lighting, or a complete heatsink assembly with fins and heat pipes.
Kohokohdat
- 120 mm fan moves air efficiently for CPU cooling
- Ball bearing design extends operational life under load
- 12 V 0.72 A power draw keeps energy use low
- Three-wire three-pin connector enables speed monitoring
- Black finish blends with standard case aesthetics
Tekniset tiedot
| Model | EFB1212VHE |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 120mm |
| Bearing Type | Ball |
| LED | No |
Kysymyksiä tästä tuotteesta
What does the 12 V 0.72 A rating mean for this 120 mm fan once it is running in a system?
It draws 0.72 A from a 12 V header, so the motherboard fan connector must supply at least that much current for the fan to reach full speed.
How does the 3-wire 3-pin interface limit control of the Delta 12038 EFB1212VHE?
The third wire reports RPM only; voltage regulation is the only way to change speed, so PWM headers will run it at full voltage unless the board supports DC mode.
What clearance does the 120 mm square frame need to mount in a case or on a heatsink?
A standard 120 mm fan mounting pattern with four screw holes spaced for 120 mm centres is required; verify the case or cooler has that hole layout.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001038BTC
Varastossa