Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small two-tone blower fan with three-pin connector

OEM Industries

OEM Industries EFWF-03F05L 5V 0.15A 3-pin blower CPU cooler

SKU CH-3GD9-CXGHX

A 5 V, 0.15 A blower fan with three-pin power connector for compact CPU or projector cooling

  • Color2-Tone
  • TypeFan & Heatsinks
  • Power Connector3 Pin
  • LEDNo
  • DC brushless blower design reduces mechanical wear
  • 5 V 0.15 A power draw keeps energy use low
  • Three-pin connector enables direct motherboard control
  • Compact form factor fits notebook and projector chassis
  • No LED lighting avoids unwanted illumination

Compact 5 V blower for tight enclosures

The OEM Industries EFWF-03F05L is a DC brushless blower that runs on a 5 V supply and draws 0.15 A through a 3-pin connector. Its two-tone housing contains both the fan and heatsink elements in a single assembly designed for confined spaces such as projectors or notebooks. No LED lighting is fitted.

Suits low-voltage 3-pin headers only

This cooler fits devices that provide a 5 V 3-pin header and need a blower-style airflow path. It is not for builds that require a 4-pin PWM connection, a higher voltage rail or a larger heatsink mass. Buyers needing adjustable speed control or greater thermal capacity should look elsewhere.

5 V 0.15 A 3-pin power specification

The single deciding specification is the 5 V 0.15 A 3-pin power requirement; the cooler will only operate correctly when the host supplies exactly that voltage and connector type.

Kohokohdat

  • DC brushless blower design reduces mechanical wear
  • 5 V 0.15 A power draw keeps energy use low
  • Three-pin connector enables direct motherboard control
  • Compact form factor fits notebook and projector chassis
  • No LED lighting avoids unwanted illumination

Tekniset tiedot

ModelEFWF-03F05L
Color2-Tone
TypeFan & Heatsinks
Power Connector3 Pin
LEDNo

Kysymyksiä tästä tuotteesta

Will the 3-pin 5 V 0.15 A blower plug directly into an older motherboard header that only supplies 5 V?

The cooler uses a standard 3-pin connector rated for 5 V at 0.15 A, so it will draw power from any 5 V fan header without an adapter.

How can I confirm the EFWF-03F05L is spinning correctly once installed?

Enter the BIOS or use monitoring software to verify the fan reports an RPM reading and that the 3-pin signal wire is active.

Does the package include mounting hardware for a notebook heatsink or must I source brackets separately?

Only the blower unit with its 3-wire lead is supplied; any retention brackets or thermal interface material must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.