Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 80mm square fan with 4-pin connector

OEM Industries

OEM Industries F128025DU 80mm 4-pin CPU cooler

SKU CH-JRY2-69D05

An 80 mm square fan with 4-pin PWM control, ball bearing and 12 V .4 A rating for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Precise speed control with 4-pin PWM connector
  • Reliable long-life operation using ball bearing design
  • Fits tight builds with compact 80 mm frame
  • Efficient 12 V 0.4 A power draw
  • Clean look with black finish and no LED

Compact 80 mm 4-pin CPU fan

The OEM Industries F128025DU is an 80 mm square fan designed for direct CPU cooler mounting. It suits small-form-factor builds or replacement cooling where an 8025 frame fits. The four-pin connector enables PWM speed control from the motherboard. No LED lighting is included.

Fits tight layouts with standard mounting

The 80 mm by 25 mm footprint matches common low-profile heatsink brackets. Ball-bearing construction supports continuous operation at 12 V and 0.4 A draw. Four-wire control frees the builder from fixed-voltage headers and allows automatic fan-curve response. No additional brackets or adapters are mentioned in the specifications.

Ships as a bare fan unit

Only the F128025DU fan itself is supplied; no mounting screws, thermal compound or software utilities are listed. The package assumes the installer already has compatible retention hardware for the target socket. Buyers needing a complete cooler kit with heatsink and fixings will need to source those separately.

Kohokohdat

  • Precise speed control with 4-pin PWM connector
  • Reliable long-life operation using ball bearing design
  • Fits tight builds with compact 80 mm frame
  • Efficient 12 V 0.4 A power draw
  • Clean look with black finish and no LED

Tekniset tiedot

ModelF128025DU
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Kysymyksiä tästä tuotteesta

How much current does the 12 V 4-pin motor draw under load?

The fan is rated at 12 V 0.4 A, so the motor will pull up to 0.4 A when running at full speed.

What noise and heat should I expect from the ball-bearing 80 mm fan running continuously?

Ball bearings run warmer and louder than fluid-dynamic types; expect a noticeable hum and measurable case-temperature rise during all-day operation.

Which motherboard header is required for the 4-wire PWM connector on this cooler?

A standard 4-pin PWM CPU fan header on the motherboard is needed for speed control and monitoring.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.