Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Red 80x25mm PWM fan with 4-pin connector

OEM Industries

OEM Industries F8025B12UB 80x25mm 12V .35A 4 Pin PWM Red GPU Fan

SKU CH-3SKR-31SPX

80 mm red PWM fan with ball bearing and 12 V 0.35 A draw for compatible graphics cards

  • ColorRed
  • TypeFan only
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • PWM control adjusts speed precisely via 4-pin connector
  • Ball bearing ensures durable rotation for long service life
  • 12 V .35 A rating matches original GPU cooler specs
  • 80 x 25 mm frame fits HD4890 HD6970 V8700 HD2900XT cards
  • Red blades add visual accent inside the case

Replacement GPU Turbine Fan

The OEM Industries F8025B12UB is an 80x25mm turbine-style cooler designed for specific legacy graphics cards. It operates on a 12V 0.35A 4-pin PWM connector with a ball bearing for durability. The red frame distinguishes it visually while the 4-wire control allows automatic speed regulation by the GPU.

Suits owners of HD4890, HD6970.

This fan matches the original form factor and connector for those models, making it a direct mechanical swap. Builders repairing other GPUs, or anyone needing a standard case fan, should look elsewhere because the turbine housing and mounting points are card-specific.

80x25mm turbine form factor

The compact radial blower draws air through the heatsink and exhausts it out the rear bracket slot, a layout that only fits the listed reference designs. Verify the original cooler dimensions and screw spacing before ordering, as no other compatibility is implied.

Kohokohdat

  • PWM control adjusts speed precisely via 4-pin connector
  • Ball bearing ensures durable rotation for long service life
  • 12 V .35 A rating matches original GPU cooler specs
  • 80 x 25 mm frame fits HD4890 HD6970 V8700 HD2900XT cards
  • Red blades add visual accent inside the case

Tekniset tiedot

ModelF8025B12UB
ColorRed
TypeFan only
Bearing TypeBall
Power Connector4 Pin
LEDNo

Kysymyksiä tästä tuotteesta

How do I install the F8025B12UB fan on my graphics card, and what step is often missed?

Connect the 4-pin PWM connector to the GPU fan header, then secure the 80x25mm frame with the original mounting screws; the step often missed is verifying the red blade orientation matches the heatsink airflow direction.

What maintenance will this ball-bearing fan need over time?

The ball bearing is sealed and requires no lubrication; if noise or vibration appears after extended use, replace the entire F8025B12UB unit as the bearing cannot be serviced.

At 12V and 0.35A, what thermal limit appears first during sustained load?

The motor draws 0.35A at 12V, so the first limit under sustained load is the fan's maximum RPM ceiling; if the GPU heatsink cannot dissipate heat at that airflow, temperatures will rise.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.