OEM Industries
OEM Industries F9733B12LG 100mm 2 Ball 12V .72A 3 Pin Blower CPU cooler
A 100 mm blower fan with dual ball bearings, 12 V 0.72 A draw and a 3‑pin connector
- ColorBlack
- TypeFan only
- Fan Size100mm
- Bearing Type2 Ball
- Power Connector3 Pin
- LEDNo
- Blower design directs airflow through tight spaces
- 100 mm blower fits 97×33 mm mounting pattern
- Dual ball bearings extend operating life
- 12 V 0.72 A draws modest power
- Three-pin connector enables speed monitoring
Blower fan for compact CPU cooling
The OEM Industries F9733B12LG is a 100mm blower-style cooler designed for systems where a traditional tower heatsink cannot fit. It draws air through the fins and exhausts it directly out of the chassis, making it suitable for small form factor builds or rackmount servers with restricted airflow paths.
Continuous airflow with dual ball bearings
The 2 Ball bearing design maintains consistent rotational speed and acoustic profile during extended operation, avoiding the wear-related slowdown common in sleeve alternatives. Rated at 12V and .72A, the motor delivers steady airflow through the 97 by 33mm blower housing without thermal throttling under sustained loads.
Replaces proprietary blowers in OEM chassis
This unit serves as a direct replacement for failed or noisy AVC 9733 blowers found in branded workstations and industrial PCs. The upgrade is worthwhile when the original fan develops bearing rattle or reduced RPM, restoring the original thermal envelope without modifying the motherboard’s 3 Pin header or mounting points.
Kohokohdat
- Blower design directs airflow through tight spaces
- 100 mm blower fits 97×33 mm mounting pattern
- Dual ball bearings extend operating life
- 12 V 0.72 A draws modest power
- Three-pin connector enables speed monitoring
Tekniset tiedot
| Model | F9733B12LG |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 100mm |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| LED | No |
Kysymyksiä tästä tuotteesta
How loud does the 100 mm blower fan run during continuous 12 V operation?
The fan draws .72 A at 12 V and uses a 2 Ball bearing; blower designs move air through a narrow duct, so sustained load produces a noticeable high-pitched airflow sound.
What motherboard header or controller do I need to run this 3-pin blower fan?
A standard 3-pin 12 V fan header supplies power and tachometer signal; no PWM header or separate controller is required.
Will the 97 x 33 mm blower housing fit alongside a full-height graphics card in a tight case?
The 100 mm frame with 33 mm depth is slimmer than most tower coolers, leaving more clearance for adjacent expansion cards in compact builds.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.0005182BTC
Varastossa