Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Square black 60mm fan with three-pin connector

OEM Industries

OEM Industries FBA06T12M 60mm 3-pin CPU cooler

SKU CH-4RSQ-N4CX3

A 60 mm square fan with ball bearing and 3-pin connector runs at 12 V 0.19 A for server or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 60 mm square frame fits tight server chassis
  • 12 V 0.19 A draw keeps power budget low
  • ball bearing design extends continuous-run life
  • three-pin connector enables motherboard speed control
  • 6015 series airflow targets high-density cooling

Compact 60 mm server fan

The OEM Industries FBA06T12M is a 60 mm square frame fan built for tight server and workstation chassis. It runs on 12 V and draws 0.19 A through a standard three-pin connector. Ball bearings support continuous operation in rack environments. No LED lighting is fitted.

Fits 6015 mounting pattern

The 60 by 15 mm footprint matches the common 6015 screw spacing used on many 1U and blade server heatsinks. Three-wire feedback allows the motherboard to monitor speed without PWM control. The thin profile leaves clearance for low-profile DIMMs and riser cards. No heatsink or mounting hardware is included.

Steady airflow under load

Ball-bearing construction maintains consistent rotation during 24-hour duty cycles in inverter and telecom equipment. The 12 V supply keeps voltage drop minimal across backplane distribution. Three-pin reporting lets management software track thermal trends in real time. Designed for sustained airflow rather than burst cooling.

Kohokohdat

  • 60 mm square frame fits tight server chassis
  • 12 V 0.19 A draw keeps power budget low
  • ball bearing design extends continuous-run life
  • three-pin connector enables motherboard speed control
  • 6015 series airflow targets high-density cooling

Tekniset tiedot

ModelFBA06T12M
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Kysymyksiä tästä tuotteesta

What sustained-load limit will I hit first with the 12 V 0.19 A ball-bearing motor?

The 3-wire 3-pin connector supplies fixed 12 V power, so the 0.19 A draw and ball-bearing friction set the thermal ceiling before any speed curve can be adjusted.

How much noise and heat does the 60 mm × 15 mm frame produce running 24/7 in a server chassis?

At 12 V the fan spins continuously, moving air through the 6015 form factor; ball bearings add a steady mechanical hum and the 0.19 A current becomes constant waste heat inside the case.

Which motherboard header must I already have to plug in the 3-pin connector?

A standard 3-pin 12 V fan header — the cooler draws 0.19 A and uses three wires for power, ground and tachometer signal.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.