Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 60mm square CPU cooling fan with ball bearing

OEM Industries

OEM Industries FD246025HB 60mm 24V 0.09A 2-wire CPU cooler

SKU CH-GPZW-TSHEP

60 mm case fan with ball bearing, 24 V 0.09 A two-wire power and 25 to 30 dBA noise

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • 24 V power draw keeps system power low
  • 60 mm frame fits compact cases and tight clearances
  • Ball bearing design extends operational lifespan
  • 25 to 30 dBA output runs quietly under load
  • 25 to 30 CFM airflow cools CPU effectively

Compact 60 mm 24 V fan for tight builds

This 60 mm square frame fits the 6025 form factor and runs on a 24 V supply drawing 0.09 A. The two-wire power connector delivers simple on-off control without PWM signalling. It is intended for system integrators and hobbyists who need a basic airflow device in confined spaces.

Ball-bearing construction with two-wire simplicity

Dual ball bearings support continuous rotation at the rated 25 to 30 dBA acoustic range and 25 to 30 cfm airflow. The black plastic frame mounts with standard 60 mm screw holes, and the absence of LEDs keeps the unit visually neutral. Two-wire wiring means speed is fixed unless an external voltage regulator is added.

Replaces worn 60 mm case or cooler fans

The FD246025HB serves as a direct swap for failed 60 mm fans in legacy coolers, industrial enclosures or compact chassis. The upgrade is worthwhile when the original sleeve-bearing unit has become noisy or seized, and a 24 V rail is already present. Buyers who need PWM speed control or a three- or four-pin header should look elsewhere.

Kohokohdat

  • 24 V power draw keeps system power low
  • 60 mm frame fits compact cases and tight clearances
  • Ball bearing design extends operational lifespan
  • 25 to 30 dBA output runs quietly under load
  • 25 to 30 CFM airflow cools CPU effectively

Tekniset tiedot

ModelFD246025HB
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

Kysymyksiä tästä tuotteesta

What does the 2-wire power connector mean for speed control on the FD246025HB?

The 2-wire connector supplies fixed 24 V power, so the fan runs at full speed continuously with no PWM or voltage regulation.

How much clearance does the 60 mm by 25 mm frame need for mounting?

It requires a 60 mm square cut-out and 25 mm depth, matching standard 6025 mounting holes.

How do you connect the two wires correctly during installation?

Connect the red wire to 24 V positive and the black wire to ground; reversing them will prevent the fan from spinning.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.