Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120mm axial fan with two wires and ball bearing

OEM Industries

OEM Industries FFB1224VHE 120mm 24V 1.2A 2-wire axial fan

SKU CH-JSZQ-9MPZC

120 mm axial fan with ball bearing runs on 24 V at 1.2 A for server or inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • High airflow from 120 mm axial design
  • Reliable 24 V 1.2 A ball-bearing motor
  • Simple two-wire power connection
  • Compact 120 mm frame fits tight spaces
  • Built for inverter, converter and server use

Industrial 120 mm 24 V axial fan

The OEM Industries FFB1224VHE is a 120 mm ball-bearing fan rated for 24 V and 1.2 A. It uses a simple two-wire power connection without PWM or tachometer feedback. The unit is aimed at technicians who need reliable airflow for inverters, converters or server chassis where 24 V DC is already present.

Two-wire installation basics

Only a positive and negative lead must be connected to a 24 V supply, so wiring is straightforward for anyone familiar with DC power. The absence of a third or fourth wire means no speed reporting or motherboard control is possible. Polarity must be observed because the fan lacks reverse-voltage protection and will not spin if wired backwards.

Sustained 24 V operation

Ball bearings and the 1.2 A current rating support continuous running in warm enclosures such as power converters. Airflow remains steady as long as the supply voltage is stable, and the two-wire design avoids signal-cable fatigue. The fan is not suited for builds that require variable speed curves or software monitoring.

Kohokohdat

  • High airflow from 120 mm axial design
  • Reliable 24 V 1.2 A ball-bearing motor
  • Simple two-wire power connection
  • Compact 120 mm frame fits tight spaces
  • Built for inverter, converter and server use

Tekniset tiedot

ModelFFB1224VHE
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

Kysymyksiä tästä tuotteesta

How can I confirm the FFB1224VHE is spinning correctly after wiring it to a 24V supply?

Apply 24V across the two wires and measure current draw; it should read close to 1.2A while the 120mm rotor spins smoothly and quietly.

What comes in the box and what must I source separately for the FFB1224VHE?

The unit is a fan only; you receive the axial cooler with two bare leads. Mounting screws, a 24V power source and any connector housing are not included.

Which FFB1224VHE variant should I choose for a 24V server or inverter chassis?

This single model runs at 24V and 1.2A with ball-bearing construction; select it when your chassis requires a 120mm two-wire axial fan at that voltage and current.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.