Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 12V 0.25A 2-wire fan for HD4650 4670

OEM Industries

OEM Industries FW1253-A1042A 12V 0.25A 2Wire HD4650 4670 CPU cooler

SKU CH-Q4FS-30G5R

A 12 V, 0.25 A two-wire replacement fan for HD 4650 and 4670 graphics cards

  • ColorBlack
  • TypeFan only
  • LEDNo
  • 12V 0.25A rating provides efficient low-power cooling
  • Two-wire connector enables simple motherboard installation
  • Black frame matches discreet system aesthetics
  • Designed for HD4650 and 4670 video card compatibility
  • Fan-only unit serves as direct replacement part

OEM Industries FW1253-A1042A 12V 0.25A Fan

The OEM Industries FW1253-A1042A is a 12V 0.25A replacement fan designed for specific graphics card coolers. It targets owners of HD4650 or 4670 video cards needing a direct two-wire replacement. The unit ships new in black with no LED lighting. It is a fan-only component, not a full heatsink assembly.

Two-Wire 12V Connection Fits Existing Shroud

This cooler fan connects via a standard two-pin 12V header on the graphics card PCB. It draws 0.25A and requires no additional power adapters or motherboard headers. The compact form factor fits inside the original card shroud, freeing up expansion slots. Builders must verify the physical mounting holes match the FW1253-A1042A pattern before installation.

Direct Replacement for HD4650 and 4670 Coolers

The fan provides airflow for HD4650 and 4670 video card thermal solutions. It handles the thermal load these mid-range GPUs produce under typical workloads. It is not suited for higher-power cards or overclocked configurations demanding greater static pressure. Buyers needing PWM control or higher CFM ratings should look elsewhere.

Kohokohdat

  • 12V 0.25A rating provides efficient low-power cooling
  • Two-wire connector enables simple motherboard installation
  • Black frame matches discreet system aesthetics
  • Designed for HD4650 and 4670 video card compatibility
  • Fan-only unit serves as direct replacement part

Tekniset tiedot

ModelFW1253-A1042A
ColorBlack
TypeFan only
LEDNo

Kysymyksiä tästä tuotteesta

How much current does the 12V 0.25A fan draw when the HD4650 or 4670 GPU runs at full load for hours?

The fan is rated at 12V and 0.25A, so it will draw a steady 0.25 amps from the 12 volt rail even during prolonged heavy GPU use.

Will the two-wire fan become noisy or run hot when the video card operates all day?

With only two wires the fan runs at a fixed 12V speed; it has no PWM control to reduce noise, so acoustic output and motor temperature stay constant throughout continuous operation.

Which connector must the graphics card already have for this FW1253-A1042A cooler to plug in?

The card needs a 2-pin header that matches the fan's 2-wire plug; without that exact header the cooler cannot be connected.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.