Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120mm circular CPU fan with three-pin connector

OEM Industries

OEM Industries G10C12MS2AH-56J14 120mm 3-pin CPU cooler

SKU CH-8Z1G-NBWPH

A 120mm ball-bearing fan with a 3-pin connector runs at 12V and 1.76A for CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 120 mm fan moves air efficiently for CPU cooling
  • Ball bearing reduces friction for longer operational life
  • 3-pin connector enables straightforward motherboard installation
  • 12 V 1.76 A rating delivers consistent power to the motor
  • Black finish blends cleanly with standard PC builds

120mm 3-pin CPU cooler

The OEM Industries G10C12MS2AH-56J14 is a 120mm fan unit designed for CPU air cooling. It uses a ball bearing and runs on a 12V 1.76A supply via a 3-pin connector. This cooler suits builders replacing a worn fan or assembling a basic system. It is not for buyers who need RGB lighting or PWM speed control.

Compatibility check

Verify that your motherboard header provides a 3-pin connection and 12V power. Confirm the mounting holes match a 120mm circular pattern before ordering. Ensure the chassis has enough clearance for the fan thickness. This unit is not for boards that only offer 4-pin PWM headers without 3-pin support.

Build integration

The fan draws 1.76A at 12V, so the header must supply that current. Its 3-wire design reports speed but does not accept PWM signals. The black finish blends with most builds. It frees up a 4-pin header for a device that requires PWM control.

Kohokohdat

  • 120 mm fan moves air efficiently for CPU cooling
  • Ball bearing reduces friction for longer operational life
  • 3-pin connector enables straightforward motherboard installation
  • 12 V 1.76 A rating delivers consistent power to the motor
  • Black finish blends cleanly with standard PC builds

Tekniset tiedot

ModelG10C12MS2AH -56J14
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Kysymyksiä tästä tuotteesta

Does the G10C12MS2AH-56J14 ship with a heatsink or mounting hardware, or is it only the 120 mm fan?

The listing describes a fan-only unit; no heatsink, brackets or thermal paste are included, so a compatible cooler base must be sourced separately.

The model code contains 56 and 14 — do those numbers mark different speed or voltage versions I should choose between?

56 and 14 are fixed parts of the single MPN G10C12MS2AH-56J14; there are no selectable variants, so the only choice is this exact 12 V, 1.76 A ball-bearing fan.

With a 1.76 A draw on a 3-pin header, will the fan run at full speed or be limited by the motherboard?

A standard 3-pin CPU header supplies 12 V; the fan will draw its rated 1.76 A and spin at its designed speed, with voltage control determining the actual RPM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.