Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 50mm blower fan with maglev bearing and 3-pin connector

OEM Industries

OEM Industries GB1205PHV1-8AY R 50mm Blower Fan CPU cooler

SKU CH-1XF2-BHMGZ

A 50 mm blower-style fan with maglev bearing and 12 V, 1.1 W power draw for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • Blower design directs focused airflow over compact components
  • 50 mm frame fits tight projector or printer chassis
  • Maglev bearing reduces friction for quieter long-term operation
  • 12 V 1.1 W draw keeps power demand low
  • 3-pin connector enables speed monitoring and control

Compact 50 mm Blower Fan

This 50 mm blower fan is designed for tight spaces where directed airflow is needed. It suits small-form-factor PCs, industrial equipment or replacement cooling in projectors and printers. The maglev bearing aims to reduce friction and extend operating life. Buyers looking for a low-profile axial cooler will need a different design.

Verify Voltage and Connector

Confirm your device supplies 12 V and accepts a three-pin power connector before ordering. The fan draws 1.1 W at the rated voltage. Physical dimensions are 50 mm by 15 mm so check the mounting holes and clearance in your chassis. No PWM control wire is present on this three-wire lead.

Fan-Only Package

The box contains the blower fan unit only with no mounting brackets, screws or speed-control software. You must reuse existing hardware or source compatible fixings separately. The absence of LEDs keeps the assembly plain for professional or embedded use. No additional cables or adapters are bundled.

Kohokohdat

  • Blower design directs focused airflow over compact components
  • 50 mm frame fits tight projector or printer chassis
  • Maglev bearing reduces friction for quieter long-term operation
  • 12 V 1.1 W draw keeps power demand low
  • 3-pin connector enables speed monitoring and control

Tekniset tiedot

ModelGB1205PHV1-8AY
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Kysymyksiä tästä tuotteesta

Does the 50mm blower fan ship with mounting screws or a heatsink, or must those be sourced separately?

The listing covers the fan unit only; no screws, brackets or heatsink are included, so you will need to supply your own mounting hardware.

Should I choose the 12V 1.1W maglev version or look for a different voltage or bearing type?

This model is a 12V 1.1W unit with maglev bearings and a 3-pin connector; no other voltage or bearing variants are listed for this part number.

What does the 1.1W power draw mean for noise and airflow once the fan is installed in a projector or compact PC?

At 1.1W the fan draws little current, so it runs quietly while still delivering focused blower-style airflow through the 50×15mm frame.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.