Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 80mm axial fan with four-pin connector

OEM Industries

OEM Industries H80E12MS1B7-57A02 80mm 4 Pin CPU Fan

SKU CH-8WPK-8DK4N

An 80mm axial fan with dual ball bearings and a 4‑pin PWM connector runs at 12V drawing 0.58A for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • LEDNo
  • Dual ball bearing extends operational lifespan
  • 12 V, 0.58 A power draw fits standard headers
  • 80 mm axial design moves air through tight CPU zones
  • Four-pin PWM connector enables automatic speed control
  • Black frame blends cleanly into any build

80 mm 4-pin axial fan

This 80 mm axial fan uses a dual ball bearing and a 12 V, 0.58 A motor with a four-wire PWM connector. It is sold as a fan-only unit without LEDs, intended as a direct replacement for CPU or case cooling slots that accept an 8038-size frame.

Fits standard 80 mm CPU or case mounts

Builders who need a drop-in 80 mm cooler with PWM control will find the four-pin connector and ball-bearing design a match; systems that require a larger frame, a three-pin voltage-controlled header, or an integrated heatsink will not be compatible with this fan-only unit.

Four-wire PWM connector decides fit

The 4-pin PWM header is the single specification that determines whether this fan can be speed-controlled by the motherboard; if the board or controller only offers three-pin voltage control, the fan will run at full speed without regulation.

Kohokohdat

  • Dual ball bearing extends operational lifespan
  • 12 V, 0.58 A power draw fits standard headers
  • 80 mm axial design moves air through tight CPU zones
  • Four-pin PWM connector enables automatic speed control
  • Black frame blends cleanly into any build

Tekniset tiedot

ModelH80E12MS1B7-57A02
ColorBlack
TypeFan only
Fan Size80mm
Bearing Type2 Ball
Power Connector4 Pin
LEDNo

Kysymyksiä tästä tuotteesta

What is the first limit reached under sustained load with the 2 ball bearing and 12V .58Amp rating?

The 2 ball bearing design handles continuous rotation at the rated 12V .58Amp current, so bearing wear becomes the limiting factor before electrical limits are reached.

How much noise and heat does the 80mm axial fan produce when running all day at 12V .58Amp?

The 8038 frame size and axial blade layout move air steadily at the rated 12V .58Amp, generating typical operational noise and minimal heat from the motor itself.

Which 4 pin header must my motherboard already have for this H80E12MS1B7-57A02 to function?

A standard 4 pin PWM header supplying 12V is required; the fan's 4 wire connector plugs directly into that header for power and speed control.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.