Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black square 40mm fan, 20mm thick, 3-wire 12V 1.6W

OEM Industries

OEM Industries KD1204PKVX 40mm Mgalev CPU cooler

SKU CH-0FJ3-58GAJ

A 40 mm square cooling fan with Mgalev bearing, 12 V 1.6 W power and three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeMgalev
  • LEDNo
  • Reliable 3‑wire PWM control with 12 V 1.6 W input
  • Maglev bearing cuts friction for longer life
  • Compact 40×20 mm square fits tight builds
  • No LED keeps system lighting clean
  • SUNON engineering backs consistent airflow

40 mm Mgalev fan for compact cooling

The OEM Industries KD1204PKVX is a 40 mm square fan built with Mgalev bearing technology. It runs on 12 V and draws 1.6 W through a standard three-wire connection. The unit is sold new and contains no LED lighting. It suits builders who need a low-profile airflow component for tight spaces.

Straightforward three-wire mounting

Installation consists of aligning the 40 mm square frame with the matching cut-out and securing it with four screws. The three-wire lead plugs directly into a 12 V fan header; no adapter or PWM configuration is required. The only common issue is forgetting to route the short cable clear of adjacent heatsink fins before tightening the last screw.

Targeted airflow for small heatsinks

At 1.6 W the fan delivers enough static pressure for 40 mm tower coolers or chipset heatsinks in industrial and embedded systems. It cannot sustain the airflow demanded by larger desktop CPU coolers or multi-GPU enclosures. Buyers needing higher CFM for overclocked processors should look at larger frame sizes.

Kohokohdat

  • Reliable 3‑wire PWM control with 12 V 1.6 W input
  • Maglev bearing cuts friction for longer life
  • Compact 40×20 mm square fits tight builds
  • No LED keeps system lighting clean
  • SUNON engineering backs consistent airflow

Tekniset tiedot

ModelKD1204PKVX
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeMgalev
LEDNo

Kysymyksiä tästä tuotteesta

How do I confirm the KD1204PKVX is running correctly after installation?

Verify the fan spins when 12 V power is applied and listen for smooth rotation from the Mgalev bearing.

What comes in the box and what must I source separately?

The package contains the 40 mm square fan with three-wire lead; mounting screws and any required adapter cables are not included.

Which KD1204PKVX version should I choose for my build?

Only the 12 V 1.6 W 4020 model with Mgalev bearing is offered, so select this single variant.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.