Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OEM Industries

OEM Industries KD1208PTB1 8025 12V 1.8W 2-Wire CPU Cooler

SKU CH-QSB5-F43DC

An 80 by 25 millimetre SUNON square fan running at 12 volts and 1.8 watts with a two-wire connection

  • ColorBlack
  • TypeFan only
  • LEDNo
  • SUNON 8025 fan delivers reliable 12 V cooling
  • Compact 80 x 25 mm frame fits tight chassis spaces
  • Low 1.8 W draw reduces system power load
  • Simple 2-wire connection enables quick installation
  • Black finish blends with any build aesthetic

Compact 80 x 25 mm CPU cooler

The OEM Industries KD1208PTB1 is a 12 V, 1.8 W square fan designed for direct CPU mounting. Its 8025 frame fits tight clearances where larger tower coolers cannot. The two-wire power lead provides simple connectivity to a standard motherboard header. This unit suits builds that need basic active cooling without RGB or PWM control.

Suits low-power systems and replacement jobs

Ideal for refreshing an ageing office PC, a thin client or a home server that runs a low-TDP processor. The 12 V, 1.8 W rating keeps power draw minimal. Builders who need variable speed control, higher static pressure or quieter operation under load should look at a four-wire PWM alternative with a larger heatsink.

Check mounting holes and header type

Verify that your motherboard or chassis offers the 80 mm square mounting pattern used by the KD1208PTB1. Confirm the CPU fan header supplies 12 V on a two-pin or three-pin connector; the cooler’s two-wire plug will not report speed to the BIOS. Ensure physical clearance around the socket matches the 8025 footprint before ordering.

Kohokohdat

  • SUNON 8025 fan delivers reliable 12 V cooling
  • Compact 80 x 25 mm frame fits tight chassis spaces
  • Low 1.8 W draw reduces system power load
  • Simple 2-wire connection enables quick installation
  • Black finish blends with any build aesthetic

Tekniset tiedot

ModelKD1208PTB1
ColorBlack
TypeFan only
LEDNo

Kysymyksiä tästä tuotteesta

What size CPU cooler mounting holes does the 80 mm square frame need?

The 8025 cooler uses an 80 mm by 80 mm square footprint, so the motherboard must provide matching 80 mm mounting centres.

Will the 2-wire 12 V fan header on an older board run the KD1208PTB1 without PWM control?

Yes, the 2-wire design draws 1.8 W at 12 V and spins at full speed on any standard 12 V header.

How can I confirm the fan is spinning at the correct voltage after installation?

Measure 12 V across the two power wires while the system is running; the fan should rotate steadily at that voltage.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.