Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 80mm square CPU cooler fan with 2-pin connector

OEM Industries

OEM Industries KDE1208PTB3 80mm CPU cooler 12V 1.4W 2-pin

SKU CH-BC9D-ZWWJZ

An 80 mm ball-bearing fan delivering 1600 to 1999 rpm at 15 to 20 dBA with a 2-pin 12 V connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • 80 mm frame fits compact builds
  • Ball bearing runs at 1600-1999 rpm for steady airflow
  • 12 V, 1.4 W draw keeps power use low
  • 15-20 dBA operation stays quiet under load
  • Two-pin connector enables simple motherboard control

Compact 80mm CPU Fan for Tight Builds

This OEM Industries KDE1208PTB3 cooler fits standard 80mm mounting holes and runs on a 12 V two‑pin header. The ball‑bearing design targets 1600‑1999 rpm while keeping acoustic output between 15 and 20 dBA. It suits small‑form‑factor systems or replacement jobs where a low‑profile black fan is required.

No Accessories or Software Included

The package contains only the fan unit itself with its two‑wire lead. There are no mounting brackets, screws, PWM cables or control utilities supplied. Installers must provide their own fixation hardware and connect the 2‑pin plug directly to a compatible motherboard or fan controller header.

2‑Pin Connector Limits Speed Control

Because the cooler uses a simple 2‑pin power connector, voltage‑based regulation is the only way to adjust fan speed. Systems that rely exclusively on 4‑pin PWM headers will not be able to modulate this fan automatically. Buyers needing PWM control or higher static pressure for dense heatsinks should look elsewhere.

Kohokohdat

  • 80 mm frame fits compact builds
  • Ball bearing runs at 1600-1999 rpm for steady airflow
  • 12 V, 1.4 W draw keeps power use low
  • 15-20 dBA operation stays quiet under load
  • Two-pin connector enables simple motherboard control

Tekniset tiedot

ModelKDE1208PTB3
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Kysymyksiä tästä tuotteesta

How often should the ball bearing in the 80mm fan be inspected or replaced?

Ball bearings in a 12 V 1.4 W fan typically run for years without service; listen for rising noise above the rated 15–20 dBA as the first sign wear is starting.

What stops the KDE1208PTB3 from spinning faster when the CPU stays hot for hours?

The fan tops out at 1999 rpm, so sustained loads cannot push airflow beyond that fixed maximum speed.

Will the 2-pin connector draw more than 1.4 W or get louder than 20 dBA during all-day operation?

Power stays at 1.4 W and noise remains within the 15–20 dBA range because the 12 V supply and 1999 rpm ceiling are fixed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.