Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black square blower fan 150 by 25 mm with two wires

OEM Industries

OEM Industries M1502512M 150×25 mm 12 V .42 A 2-wire blower CPU cooler

SKU CH-Y8QB-FY7A7

150 mm by 25 mm blower fan runs on 12 V at 0.42 A with a two-wire connector

  • ColorBlack
  • TypeFan only
  • Power Connector2 Wires
  • LEDNo
  • DC brushless motor reduces mechanical wear for longer service life
  • 150 mm diameter moves high air volume through tight server chassis
  • 25 mm slim profile fits 1U and low-profile enclosures
  • 12 V .42 A draw keeps power budget low for dense deployments
  • Two-wire connector simplifies installation in legacy or custom backplanes

OEM Industries M1502512M 150×25 mm blower

This DC brushless blower is built for servers, inverters and compact enclosures that need directed airflow through restricted channels. It suits system integrators and maintenance engineers who need a 12 V replacement fan with a two-wire power lead.

Two-wire connection and 150×25 mm footprint

The unit installs with a simple two-wire 12 V feed; no PWM or tachometer wiring is present, so speed control and monitoring must be handled externally. Builders should verify that the chassis can accommodate the 150 mm by 25 mm frame and that the blower outlet aligns with the intended duct path.

12 V .42 A input and blower-style output

At 12 V and 0.42 A the fan draws roughly five watts, providing focused airflow for dense component stacks or ducting runs. It is not suited for open-air CPU tower cooling or builds that require PWM speed curves, high static pressure at low voltage, or four-wire motherboard headers.

Kohokohdat

  • DC brushless motor reduces mechanical wear for longer service life
  • 150 mm diameter moves high air volume through tight server chassis
  • 25 mm slim profile fits 1U and low-profile enclosures
  • 12 V .42 A draw keeps power budget low for dense deployments
  • Two-wire connector simplifies installation in legacy or custom backplanes

Tekniset tiedot

ModelM1502512M
ColorBlack
TypeFan only
Power Connector2 Wires
LEDNo

Kysymyksiä tästä tuotteesta

How can I confirm the M1502512M blower is spinning correctly after connecting the 2-wire lead?

Apply 12 V and verify the brushless motor starts smoothly; the .42 A draw should appear on a multimeter if the fan is running at full speed.

What comes in the box and what must I source separately for the 150×25 mm unit?

Only the black blower with its two-wire lead is included; mounting screws, a 12 V power source and any ducting are not supplied.

Which capacity matches a 150 mm square footprint and 25 mm thickness for a server inverter build?

The M1502512M is the single model offered in that 150×25 mm size with a 12 V .42 A rating.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.