Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 9cm square fan with 2-pin power connector

OEM Industries

OEM Industries MMF-09C24TS RN9 9CM 24V 0.2A 2 Pin Fan

SKU CH-HQ2Y-W1V6Y

A 9 cm two-ball-bearing fan running on 24 V and 0.2 A with a two-pin connector for PLC and inverter equipment

  • ColorBlack
  • TypeFan only
  • Fan Size9CM
  • Bearing Type2 Ball
  • Power Connector2 Pin
  • LEDNo
  • Original Melco build quality for reliable industrial cooling
  • 9 cm square frame fits standard 90 mm mounting holes
  • Dual ball bearing design extends operating life
  • 24 V 0.2 A rating matches PLC power supplies
  • Two-pin connector simplifies wiring in ABB and Yaskawa equipment

Industrial inverter fan

The OEM Industries MMF-09C24TS RN9 is a 9cm axial fan designed for 24V DC systems such as PLC and inverter enclosures from ABB and Yaskawa. It suits maintenance engineers and integrators who need a direct replacement for the original Melco unit in industrial control cabinets.

Thermals and power

Dual ball bearings support continuous operation at the rated 0.2A draw while keeping acoustic output low in typical enclosure airflow paths. The 24V supply rails common in automation gear power the motor directly without extra regulation.

Build integration

The 90 by 25mm frame fits standard 9cm mounting patterns and the two-wire, two-pin lead connects to existing inverter fan headers. No LED lighting or PWM signalling is present, so the fan runs at full speed whenever the rail is live.

Kohokohdat

  • Original Melco build quality for reliable industrial cooling
  • 9 cm square frame fits standard 90 mm mounting holes
  • Dual ball bearing design extends operating life
  • 24 V 0.2 A rating matches PLC power supplies
  • Two-pin connector simplifies wiring in ABB and Yaskawa equipment

Tekniset tiedot

ModelMMF-09C24TS RN9
ColorBlack
TypeFan only
Fan Size9CM
Bearing Type2 Ball
Power Connector2 Pin
LEDNo

Kysymyksiä tästä tuotteesta

How do I mount the 90 mm by 25 mm frame and wire the 2 pin connector without reversing polarity?

Align the four screw holes on the 90 mm square frame with your chassis or heatsink mounts, then connect the two wires to a 24 V source matching the 0.2 A draw; the connector is keyed so it only fits one way.

When will the 2 ball bearing assembly need replacement under continuous operation?

The dual ball bearing design is rated for long life at 24 V 0.2 A; plan to inspect for noise or vibration after several years of 24/7 use and replace the fan unit if rotation becomes rough.

At what point does airflow drop off when the fan runs at 24 V continuously?

Running at the specified 24 V 0.2 A the fan maintains its rated speed; airflow reduction appears only if the supply voltage sags below 24 V or if dust buildup restricts the 90 mm intake area.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.