Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black circular VGA fan with three-pin connector

OEM Industries

OEM Industries PLA09215D12M 12V 0.35A 3-pin circular VGA fan

SKU CH-SZDT-SEWWY

12V 0.35A three-pin circular fan with ball bearing for graphics-card cooling

  • ColorBlack
  • TypeAccessories
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 12 V 0.35 A rating keeps graphics-card thermals steady
  • ball-bearing design reduces friction for longer service life
  • three-pin connector enables motherboard speed control
  • circular form factor fits tight VGA heatsink cutouts
  • black finish blends with standard PCB aesthetics

Replacement VGA Cooling Fan

The OEM Industries PLA09215D12M is a 12V 0.35A circular fan built for graphics card coolers. It uses a three-pin connector and a ball bearing for reliable airflow. The black frame fits existing shrouds that accept this form factor. Buyers repairing or maintaining a GPU cooler can use this unit as a direct drop-in spare.

Verify Connector Pinout And Voltage

Confirm the graphics card PCB provides a three-pin header keyed for 12V operation before ordering. Measure the mounting hole spacing on the current shroud to ensure the circular frame aligns correctly. Check that the original fan draws approximately 0.35A so the board header is not overloaded. Ensure no proprietary PWM signalling is required by the card firmware.

Swaps Out Failed Three-Pin GPU Fans

This unit replaces a worn or noisy 12V three-pin circular cooler on compatible graphics cards. The upgrade is worthwhile when the original bearing has seized or developed excessive vibration. It restores stock cooling performance without modifying the heatsink or shroud. Buyers needing PWM control, higher static pressure, or a different frame diameter should look elsewhere.

Kohokohdat

  • 12 V 0.35 A rating keeps graphics-card thermals steady
  • ball-bearing design reduces friction for longer service life
  • three-pin connector enables motherboard speed control
  • circular form factor fits tight VGA heatsink cutouts
  • black finish blends with standard PCB aesthetics

Tekniset tiedot

ModelPLA09215D12M
ColorBlack
TypeAccessories
Bearing TypeBall
Power Connector3 Pin
LEDNo

Kysymyksiä tästä tuotteesta

Does the PLA09215D12M fan arrive with mounting screws or a 3-pin to 4-pin adapter, or must I supply them separately?

The listing covers the circular VGA fan itself with its three-wire 3-pin connector; no mounting hardware or adapter is mentioned, so plan to reuse existing screws or source an adapter if your header is 4-pin.

Should I pick the 12 V 0.35 A ball-bearing version or look for a different voltage or bearing type for my graphics card?

Only the 12 V 0.35 A ball-bearing model is offered here; if your card needs a different voltage or a sleeve-bearing design, you will need another part.

With a 12 V 0.35 A rating, how much airflow or noise should I expect once the fan is installed on my GPU?

The supplier specifies 12 V and 0.35 A current draw but does not publish airflow or noise figures, so exact cooling performance and acoustic levels cannot be quoted.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.