Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
120mm square CPU cooler with two-tone finish

OEM Industries

OEM Industries V35633-94 120mm 2 Ball CPU cooler

SKU CH-S3E6-EZGYZ

A 120mm dual-ball-bearing server cooler pushing 80cfm at 5000-5499rpm with a 50dBA noise level

  • Color2-Tone
  • TypeAccessories
  • Fan Size120mm
  • Bearing Type2 Ball
  • LEDNo
  • High airflow up to 80 CFM with 5000-5499 RPM fan speed
  • Dual ball bearing design for extended operational life
  • 120mm square frame fits standard server mounting points
  • 12V 2.75A power draw for efficient cooling performance
  • NIDEC VA450DC motor delivers reliable operation in server environments

OEM Industries V35633-94 120mm Server Cooler

This OEM Industries V35633-94 is a 120mm square CPU air cooler built for server environments. It uses a NIDEC VA450DC fan running on 12V at 2.75A. The two-ball bearing design targets continuous operation in rackmount or workstation chassis. It suits administrators who need a direct-replacement cooler for compatible 12038 mountings.

Sustained 5000 to 5499rpm Airflow Profile

The fan spins between 5000 and 5499rpm to push over 80cfm through dense heatsink fins. Noise exceeds 50dBA at these speeds, reflecting a focus on thermal throughput rather than acoustic comfort. The 2.75A current draw remains steady under constant load, so the cooler maintains its airflow curve without throttling during extended compute tasks.

Check 12038 Mounting and 12V 2.75A Header

Verify that your chassis uses the 12038 square mounting pattern before ordering. Confirm the motherboard or fan controller can supply 12V at 2.75A per header, as lower-rated connectors may limit speed or trip protection. This unit has no LED lighting and no PWM signal mentioned, so speed control depends on voltage regulation alone.

Kohokohdat

  • High airflow up to 80 CFM with 5000-5499 RPM fan speed
  • Dual ball bearing design for extended operational life
  • 120mm square frame fits standard server mounting points
  • 12V 2.75A power draw for efficient cooling performance
  • NIDEC VA450DC motor delivers reliable operation in server environments

Tekniset tiedot

ModelV35633-94
Color2-Tone
TypeAccessories
Fan Size120mm
Bearing Type2 Ball
LEDNo

Kysymyksiä tästä tuotteesta

How loud is the 5000-5499 rpm fan when it runs continuously in a server chassis?

The cooler produces more than 50 dBA at full speed, so expect noticeable airflow noise during sustained loads.

What power connector and voltage does the V35633-94 require?

It draws 2.75 A at 12 V DC, so a standard 4-pin PWM header or a dedicated 12 V fan header on the motherboard is needed.

Will the 120 mm square frame line up with the mounting holes on my existing server heatsink?

The 12038 form factor uses a 120 mm square footprint; verify your heatsink’s hole pattern matches this spacing before installing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.