ONEBOOM
ONEBOOM S5 2TB 2.5" SATA internal SSD
A 2.5 inch SATA internal SSD with 2TB capacity, 3D NAND flash, sequential speeds up to 550 MBps read and 520 MBps write, and 1000 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity2TB
- Memory Components3D NAND
- InterfaceSATA III
Options 2TB
- 2TB
- 512GB
- 2TB capacity stores large game libraries and media files
- Sequential read up to 550 MBps cuts boot and load times
- Sequential write up to 520 MBps accelerates file saves and installs
- 3D NAND flash delivers 1000 TBW endurance for long-term reliability
- Low 0.41 W idle and 1.85 W active power extends laptop battery life
2TB SATA drive for games and apps
The ONEBOOM S5 provides 2TB of capacity for operating systems, applications and large game libraries. Its 3D NAND flash supports sequential reads up to 550 MBps and writes up to 520 MBps, with random performance of 63000 read IOPS and 69000 write IOPS. The SATA III interface fits standard 2.5" bays in laptops and desktops.
Thermals and power in daily use
Rated for 0°C to 70°C operation, the drive runs without active cooling in typical chassis airflow. Idle draw is 0.41W and active draw peaks at 1.85W, keeping heat output low during extended sessions. With no moving parts, acoustic output is effectively silent.
Endurance rating and monitoring
A 1000 TBW rating and 1,000,000 hour MTBF reflect the durability of the 3D NAND array under heavy write workloads. These figures let you plan drive-health checks and replacement cycles using standard S.M.A.R.T. tools. No proprietary software bundle is included.
Kohokohdat
- 2TB capacity stores large game libraries and media files
- Sequential read up to 550 MBps cuts boot and load times
- Sequential write up to 520 MBps accelerates file saves and installs
- 3D NAND flash delivers 1000 TBW endurance for long-term reliability
- Low 0.41 W idle and 1.85 W active power extends laptop battery life
Tekniset tiedot
| Brand | ONEBOOM |
|---|---|
| Series | S5 |
| Model | S5-2TB |
| Part Number | S5-2TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 63,000 IOPS |
| 4KB Random Write | Up to 69,000 IOPS |
| Terabytes Written (TBW) | 1000TB |
| MTBF | 1,000,000 hours |
| Power Consumption (Idle) | 0.41W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 100.7mm |
| Width | 70.0mm |
| Depth | 7.0mm |
| Weight | 50g |
Tämän mallin muut versiot
1 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Kysymyksiä tästä tuotteesta
How do I install the 2.5" SATA drive and which step do people often miss?
Mount the 2.5 inch drive in a 2.5 inch bay or adapter, connect the SATA data and power cables, then initialise and format the 2TB volume in Disk Management — the step most people skip.
What maintenance or replacement will the 3D NAND SSD need later?
No scheduled maintenance is required; the drive is rated for 1000 TBW and 1000000 hours MTBF, so replacement is only needed if the 2TB capacity is exceeded or a hardware fault occurs.
What limit appears first during sustained writes on the SATA III SSD?
The SATA III interface caps sequential write at 520 MBps, so that interface ceiling is reached before the 3D NAND or thermal limits under heavy sustained loads.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
