Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black plastic M.2 NVME enclosure, 120 by 34 by 14.7 mm, tool-free, USB-C cable included

Orico

Orico M.2 NVME Enclosure 10Gbps USB 3.2 2230/2242/2260/2280 Tool-Free

SKU CH-Z94G-B0469 MPN M.2

Tool-free M.2 NVME enclosure accepts 2230, 2242, 2260 and 2280 drives at 10Gbps over USB 3.2 Type-C with UASP and TRIM support

  • ColorBlack
  • TypeEnclosure
  • MaterialPlastic
  • External InterfaceUSB Type C
  • HDD Count SupportedSingle SSD
  • Number of Bay1 Bay

Model M.2 NGFF SSD

  • Tool-free installation fits M.2 2230, 2242, 2260 or 2280 drives in seconds
  • 10 Gbps USB 3.2 Gen 2 transfers large files at full NVME speed
  • UASP and TRIM support keeps SSD performance consistent over time
  • Included cooling vest and thermal pad manage drive temperature during heavy loads
  • Compact 120 × 34 × 14.7 mm black ABS case works with Windows, Mac, Linux and Android

Compact NVMe Enclosure for Portable Storage

The Orico M.2 NVMe enclosure accepts 2230, 2242, 2260 and 2280 form-factor drives up to 4TB. A USB 3.2 Gen2 Type-C connection delivers 10Gbps bandwidth for external boot drives, game libraries or backup archives. UASP and TRIM support maintain consistent throughput on Windows, macOS, Linux and Android hosts.

Tool-Free Assembly With Included Cooling

Slide the SSD into the keyed M-key slot, snap the cover shut and connect the supplied C-to-C cable — no screws or tools required. A thermal pad and snap-on cooling vest ship in the box to dissipate heat from the controller and NAND. The ABS shell measures 120 by 34 by 14.7 millimetres, so the drive sits flush against the PCB without rattling.

Sustained Transfer Stability Under Load

UASP offloads command queuing from the host CPU, reducing overhead during long sequential reads or writes. The cooling vest and thermal pad keep the SSD below throttle thresholds during extended video offloads or large dataset duplication. TRIM commands pass through transparently, preserving write performance across repeated fill-and-erase cycles.

Kohokohdat

  • Tool-free installation fits M.2 2230, 2242, 2260 or 2280 drives in seconds
  • 10 Gbps USB 3.2 Gen 2 transfers large files at full NVME speed
  • UASP and TRIM support keeps SSD performance consistent over time
  • Included cooling vest and thermal pad manage drive temperature during heavy loads
  • Compact 120 × 34 × 14.7 mm black ABS case works with Windows, Mac, Linux and Android

Tekniset tiedot

ColorBlack
TypeEnclosure
MaterialPlastic
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I confirm the enclosure is running at 10Gbps after setup?

Connect it to a USB 3.2 Gen 2 port, run a speed test on the NVME drive, and verify sequential reads approach the 10Gbps link rate.

What comes in the box and do I need any extra cables or tools?

The package includes the M.2 NVME case, a USB C-to-C cable, a cooling vest, a thermal pad and a manual; no tools are required for installation.

Which SSD length should I choose for the 120*34*14.7mm enclosure?

The case accepts 2230, 2242, 2260 and 2280 drives, so pick the length that matches your M.2 module.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.