Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Red transparent M.2 NVMe enclosure with aluminium plate and USB-C cables

Orico

Orico M.2 NVMe Enclosure USB 3.2 Gen 2 10 Gbps Red

SKU CH-BS8Z-2ZB0X

Tool-free enclosure fits 2230 to 2280 M-key NVMe SSDs and delivers 10 Gbps over USB 3.2 Gen 2 Type-C

  • SizeCompatible with 2230, 2242, 2260, 2280 M.2 NVME (M key) SSD
  • ColorRed
  • External InterfaceUSB 3.1 Type-C
  • AC AdapterNo
  • MaterialAluminum / Plastic
  • Internal InterfaceM.2 NVME M-Key

External Interface USB 3.1 Type-C

Size M.2 NVME PCI-E x 4 M-Key SSD

  • Tool-free sliding closure for quick SSD swaps
  • USB 3.2 Gen 2 delivers 10 Gbps bandwidth
  • Fits 2230 2242 2260 2280 M-key NVMe drives
  • Aluminium and copper thermal design keeps temperatures low
  • Includes USB-C and USB-A cables for broad host compatibility

What it is and who it fits

The Orico enclosure turns a single M.2 NVMe SSD into a portable USB-C drive. It accepts 2230, 2242, 2260 and 2280 M-key modules up to 2 TB. Tool-free sliding closure and two supplied cables make it ready for Windows, Mac or Linux without drivers. The red transparent shell lets you see the installed module.

Practical limits of the USB 3.2 Gen 2 link

The USB 3.2 Gen 2 interface caps theoretical throughput at 10 Gbps. Real-world speed depends on the SSD controller, cable quality and host port implementation. UASP and TRIM support help maintain performance, but the enclosure cannot exceed the bus ceiling. No external power adapter is included, so the host port must supply enough current for the drive.

What this replaces and when to upgrade

It replaces internal-only NVMe storage or slower SATA-based enclosures when you need portable access to an existing M-key module. The jump is worth it if you already own a compatible NVMe SSD and want plug-and-play mobility across multiple machines. Builders who need SATA M.2 support or capacities beyond 2 TB must look elsewhere.

Kohokohdat

  • Tool-free sliding closure for quick SSD swaps
  • USB 3.2 Gen 2 delivers 10 Gbps bandwidth
  • Fits 2230 2242 2260 2280 M-key NVMe drives
  • Aluminium and copper thermal design keeps temperatures low
  • Includes USB-C and USB-A cables for broad host compatibility

Tekniset tiedot

BrandORICO
SizeCompatible with 2230, 2242, 2260, 2280 M.2 NVME (M key) SSD
ColorRed
External InterfaceUSB 3.1 Type-C
AC AdapterNo
MaterialAluminum / Plastic
Internal InterfaceM.2 NVME M-Key
FanNo
TypeEnclosure
HDD Count SupportedSingle SSD
Number of Bay1
Maximum Capacity (per Bay)Up to 2TB
PowerNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Which SSD lengths does this enclosure accept?

It fits M.2 NVMe M-Key drives in 2230, 2242, 2260 and 2280 sizes, up to 2 TB per bay.

What real-world transfer speed can I expect from the 10 Gbps USB 3.2 Gen 2 link?

The 10 Gbps interface supports UASP and TRIM, so sustained reads and writes approach the drive's own limits rather than the older 5 Gbps ceiling.

Does the USB 3.1 Type-C port limit performance compared with a USB 3.2 Gen 2 port?

USB 3.1 Gen 2 and USB 3.2 Gen 2 are the same 10 Gbps specification, so the port does not cap throughput below the rated 10 Gbps.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.