Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Orico

Orico M2PJM-C3 M.2 NVMe SATA USB 3.1 Gen 2 Type-C 10Gbps enclosure

SKU CH-DSP0-CG2S5

Aluminum enclosure fits 2230 to 2280 M.2 NVMe and SATA SSDs, delivering 10 Gbps over USB 3.1 Gen 2 Type-C with auto-sleep after 10 minutes

  • ColorGray
  • SizeM.2
  • TypeEnclosure
  • AC AdapterNo
  • MaterialAluminum
  • Internal InterfaceM.2 NVME /NGFF SATA SSD

Material Aluminum

Interface USB Type C

  • USB 3.1 Type-C
  • USB Type C

Bay 1

Size M.2 NVMe / NGFF SSD

Model 1 Bay

  • 1 Bay
  • M.2 NVME SSD (20Gbps)

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Supports M.2 NVMe and SATA drives up to 2TB
  • Aluminium alloy body with thermal pad for effective cooling
  • USB 3.1 Gen 2 Type-C delivers up to 10Gbps with NVMe
  • RTL9210B controller enables UASP and driver-free hot-swap
  • Auto-sleep after 10 minutes idle extends SSD lifespan

USB 3.1 Gen 2 Type-C M.2 enclosure

This aluminum enclosure accepts one M.2 NVMe or SATA SSD up to 2TB. It connects via USB 3.1 Gen 2 Type-C at 10Gbps for NVMe drives and 5Gbps for SATA drives. The RTL9210B controller supports UASP for stable transfers. No driver is required and the unit is hot-swappable.

Suits NVMe or SATA M.2 drives up to 2TB

Builders who need a compact, bus-powered enclosure for 2230, 2242, 2260 or 2280 M-key, B-key or B+M-key SSDs will find it fits. It works with Windows, Mac, Linux and Android devices that have USB-C and OTG support. Users needing RAID, multiple bays or capacities above 2TB should consider other solutions.

10Gbps NVMe throughput via USB 3.1 Gen 2

The single specification that decides fit is the 10Gbps theoretical bandwidth for NVMe SSDs over the USB 3.1 Gen 2 Type-C link. SATA SSDs run at 5Gbps. An auto-sleep function powers the drive down after 10 minutes of inactivity to extend its life.

Kohokohdat

  • Supports M.2 NVMe and SATA drives up to 2TB
  • Aluminium alloy body with thermal pad for effective cooling
  • USB 3.1 Gen 2 Type-C delivers up to 10Gbps with NVMe
  • RTL9210B controller enables UASP and driver-free hot-swap
  • Auto-sleep after 10 minutes idle extends SSD lifespan

Tekniset tiedot

BrandORICO
SeriesORICO M2PJM-C3
ModelORICO M2PJM-C3
ColorGray
SizeM.2
TypeEnclosure
AC AdapterNo
MaterialAluminum
Internal InterfaceM.2 NVME /NGFF SATA SSD
External InterfaceUSB Type C
HDD Count SupportedSingle SSD
Number of Bay1
Maximum Capacity (per Bay)Up to 2TB
FanNo
SpecificationsCompatible with window / Mac / Linux multi-platform operating system;
FeaturesM.2 NVMe/SATA SSD
Dimensions106.5mm(L)*29mm(W)*11.5mm(H)

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What maximum speed does the USB 3.1 Gen 2 Type-C 10Gbps interface allow for an NVMe drive?

The enclosure supports up to 10Gbps theoretical bandwidth with an NVMe SSD, while a SATA SSD is limited to 5Gbps.

Which M.2 lengths and key types fit inside the 106.5 mm by 29 mm aluminum case?

It accepts 2230, 2242, 2260 and 2280 drives with M-Key, B-Key or B+M-Key connectors.

How is the RTL9210B controller set up, and what step do users often miss?

Insert the SSD, secure it with the supplied screw, connect the Type-C cable, and the drive appears instantly — no driver installation is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.