OWC 8GB DDR4 2666 ECC Unbuffered UDIMM desktop RAM
- 8GB
- DDR4 2666 (PC4 2130…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 16GB dual-channel DDR4 2666MHz ECC unbuffered UDIMM kit with CL19 timing and 1.2V operation for workstations, servers and NAS systems
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR4 2666 MHz modules that run at CL19 and 1.2 V. It is an unbuffered ECC UDIMM designed for desktop PCs, workstations, servers and NAS systems such as Synology RackStation, FlashStation and NVR DVA units.
The modules provide error-correcting code without registered buffering, a combination required by many NAS and server platforms. JEDEC-standard PC4-21300 timing ensures the memory operates at the rated 2666 MHz speed with CL19 latency.
At 1.2 V the kit draws minimal power and generates little heat, aided by the absence of a heat spreader. It is also compatible with 2133 MHz and 2400 MHz systems, allowing installation in older platforms without configuration changes.
| Brand | OWC |
|---|---|
| Part Number | 2E6D41R8016P |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes — the kit is built to match those Synology part numbers and uses the same 288-pin ECC unbuffered DDR4 2666MHz CL19 1.2V specification.
They are backward compatible and will run at 2133MHz or 2400MHz if the system cannot operate at 2666MHz.
No heat spreader is included; the modules run at standard 1.2V JEDEC voltage and are designed for typical workstation, server and NAS workloads without extra cooling.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?