Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 RDIMM circuit board with black memory chips

OWC

OWC 16GB DDR3 1333 ECC Registered RDIMM 1R3D32R416GB memory upgrade

SKU CH-CPNC-YKT4R

16 GB DDR3 1333 ECC registered RDIMM for Supermicro SuperServer 6036T, 6046T, 7046A, 7046GT and 7046T series

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB

  • ECC registered design protects data integrity in servers
  • 16 GB DDR3 1333 MHz CL9 module expands memory capacity
  • 5 V 240-pin RDIMM fits Supermicro SuperServer 6036T 6046T 7046 series
  • 2Rx4 dual-rank organisation increases bandwidth per slot
  • JEDEC and RoHS compliant build ensures reliable operation

Server memory upgrade

This single 16GB DDR3 ECC registered RDIMM is built for Supermicro SuperServer 6036T 6046T 7046A 7046GT and 7046T systems. It adds capacity to workstations servers or NAS appliances that require registered error-correcting modules. The part will not work in standard desktop computers.

Thermal and power profile

Operating at 1.5V the module follows JEDEC DDR3 specifications and runs without a heat spreader. Registered buffering reduces electrical load on the memory controller which helps keep power draw predictable in multi-DIMM configurations. No active cooling is required for normal server operation.

Compatibility gate

The 240-pin DDR3 1333 CL9 2Rx4 form factor fits only platforms that accept ECC registered memory. Builders needing unbuffered DIMMs or a different DDR generation must choose another part.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 16 GB DDR3 1333 MHz CL9 module expands memory capacity
  • 5 V 240-pin RDIMM fits Supermicro SuperServer 6036T 6046T 7046 series
  • 2Rx4 dual-rank organisation increases bandwidth per slot
  • JEDEC and RoHS compliant build ensures reliable operation

Tekniset tiedot

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 6036T Series
Supermicro SuperServer 6046T Series
Supermicro SuperServer 7046A Series
Supermicro SuperServer 7046GT Series
Supermicro SuperServer 7046T Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install this 240-pin DDR3 ECC Registered RDIMM in a Supermicro SuperServer 6036T, and what is the common mistake?

Power down the server, open the chassis, align the module notch with the slot key, and press firmly until both retention clips click. The common mistake is mixing this registered ECC DIMM with unbuffered memory, which the system will not support.

What maintenance or replacement will this 16GB 2Rx4 module need over its service life?

No routine maintenance is required; the module has no heat spreader and no moving parts. If a memory error appears, run the server diagnostics to isolate the faulty DIMM and replace only that module.

What is the first limit reached under sustained load with this CL9 1.5V DDR3 1333 kit?

The memory controller’s maximum supported capacity per channel is reached before bandwidth or thermal limits become an issue.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.