Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 16GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC RDIMM 7036A 7046A

SKU CH-9NFM-EHDF8

16 GB DDR3 ECC registered DIMM running at 1333 MHz for Supermicro 7036A and 7046A workstations

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 16GB capacity expands memory for demanding workloads
  • DDR3 1333 CL9 timing matches Supermicro 7036A and 7046A specs
  • 240-pin 1.5V RDIMM fits registered DIMM slots only
  • Single 2Rx4 module simplifies upgrade without mixing ranks

System-Specific ECC RDIMM for Supermicro

This 16GB DDR3 1333 PC3-10600 CL9 registered module is built for Supermicro SuperWorkstation 7036A and 7046A series systems. It delivers ECC error correction and registered buffering for stable operation in workstation, server, NAS and router environments. The single DIMM uses a 2Rx4 organisation and runs at 1.5V without a heat spreader.

Thermals Noise and Power Draw

Standard DDR3 voltage of 1.5V keeps power draw low and heat output minimal in normal use. No heat spreader is fitted, so airflow through the chassis handles cooling silently. Registered buffering reduces electrical load on the memory controller, contributing to steady thermals under sustained workloads.

Upgrade Path and Value

Replaces Supermicro part MEMDR316LSL05ER13 to extend the life of existing infrastructure or add capacity affordably. The jump is worth it when ECC registered memory is required and unbuffered modules cannot be used. Buyers needing unbuffered DDR3 or a different form factor cannot use this module.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 16GB capacity expands memory for demanding workloads
  • DDR3 1333 CL9 timing matches Supermicro 7036A and 7046A specs
  • 240-pin 1.5V RDIMM fits registered DIMM slots only
  • Single 2Rx4 module simplifies upgrade without mixing ranks

Tekniset tiedot

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 7036A Series
Supermicro SuperWorkstation 7046A Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 240-pin DDR3 ECC RDIMM in a Supermicro SuperWorkstation 7036A, and what step is often missed?

Power down the workstation, open the chassis, align the module notch with the DDR3 slot key, press firmly until both retention clips click, then verify in BIOS that ECC registered mode is active; the step often missed is confirming the BIOS reports ECC registered rather than unbuffered operation.

What maintenance or replacement will the 16GB DDR3 1333 CL9 2Rx4 1.5V module need over its service life?

No scheduled maintenance is required; the module either continues operating or develops correctable errors that ECC logs, at which point replacement is the only action needed.

What limit appears first when the 16GB DDR3 1333 PC3-10600 registered DIMM runs sustained workloads in a 7046A system?

The memory controller's maximum supported capacity per channel is reached before thermal or bandwidth limits become a factor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.