Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with gold edge connectors and black memory chips

OWC

OWC 16GB DDR3 1600 CL11 2Rx4 1.5V ECC Registered RDIMM server RAM

SKU CH-6CTM-YSPEB

16GB DDR3 ECC registered RDIMM at 1600MHz CL11 for servers and workstations

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • ECC registered design prevents data corruption in servers
  • 16GB capacity expands memory for virtualisation workloads
  • DDR3 1600 CL11 speed matches OEM specifications
  • 2Rx4 organisation optimises rank density per channel
  • JEDEC and RoHS compliant ensures warranty-safe upgrades

Server Memory Upgrade

This OWC module adds 16GB of DDR3 ECC registered memory to compatible workstations, servers, NAS systems and routers. It matches Supermicro part numbers including MEM-DR316L-HL01-ER16 and MEM-DR316L-SL01-ER16 for direct replacement. The 240-pin RDIMM is designed for 24/7 operation in multi-socket platforms that require registered DIMMs. It will not work in standard desktop computers or alongside unbuffered modules.

Thermals and Power

Operating at 1.5V, the module draws standard DDR3 power without a heat spreader. Passive cooling relies on chassis airflow across the bare PCB. Registered buffering reduces electrical load on the memory controller, helping keep system power draw predictable under sustained workloads. No active cooling or additional voltage is required for rated 1600MHz CL11 operation.

Build Integration

The 240-pin form factor fits DDR3 RDIMM slots in qualified server and workstation boards. ECC and registered signalling must be supported by the platform; mixing with unbuffered DIMMs is not supported. Each module presents a 2Rx4 organisation, allowing high-density population where the memory controller permits. JEDEC and RoHS compliance ensures warranty-safe integration into existing OEM infrastructure.

Kohokohdat

  • ECC registered design prevents data corruption in servers
  • 16GB capacity expands memory for virtualisation workloads
  • DDR3 1600 CL11 speed matches OEM specifications
  • 2Rx4 organisation optimises rank density per channel
  • JEDEC and RoHS compliant ensures warranty-safe upgrades

Tekniset tiedot

BrandOWC
Part Number1R6D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo

Kysymyksiä tästä tuotteesta

How do I install this 240-pin DDR3 RDIMM and what step is often missed?

Align the notch on the module with the slot key, press firmly until both side clips click, and verify the system detects the full 16 GB at 1600 MHz.

What maintenance or replacement will this 16 GB ECC registered module need later?

No routine maintenance is required; replace only if memory diagnostics report correctable errors that exceed the platform threshold.

What limit appears first when this CL11 1.5 V RDIMM runs under sustained load?

The DDR3 1600 JEDEC voltage and timing envelope caps sustained throughput before thermal limits are reached.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.