OWC 16GB DDR4 2133MHz ECC Registered RDIMM 2Rx4 CL15 1.2V 288-pin Supermicro X10SDV
- 16GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
16 GB DDR4 2133 MHz ECC registered DIMM for Dell PowerEdge C4130, FC630, M630 and M830 servers
Capacity 16GB
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This 16GB DDR4 2133MHz ECC Registered RDIMM is built for Dell PowerEdge C4130, FC630, M630 and M830 servers. It operates at 1.2V with CL15 latency and a 2Rx4 rank configuration. The module replaces Dell part numbers A7910488, A7945660, A7946645 and SNP1R8CRC/16G.
This memory suits administrators upgrading or repairing the listed Dell PowerEdge platforms. It will not work in standard desktop computers or consumer motherboards. Builders needing unbuffered non-ECC DIMMs or higher-speed modules for other platforms should look elsewhere.
The single specification that decides fit is the Registered ECC 2Rx4 organisation on a 288-pin DDR4 interface. Only systems qualified for this exact module type will accept it; mixing with unbuffered memory is not supported.
| Brand | OWC |
|---|---|
| Part Number | 2R1D42R416GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Dell PowerEdge C4130 Dell PowerEdge FC630 Dell PowerEdge M630 Dell PowerEdge M830 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the module is a 288-pin DDR4 ECC registered DIMM built for the Dell PowerEdge M630, M830, FC630 and C4130.
Power down the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until the ejector clips lock; the mistake is mixing it with unbuffered DIMMs, which will not work.
Replace it if the server reports correctable ECC errors that become uncorrectable, if memory diagnostics fail, or when you upgrade to higher-capacity registered DIMMs.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?