Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 16GB DDR4 2933MHz ECC Registered RDIMM 288pin Dell PowerEdge FC640 M640 MX740c MX840c R450

SKU CH-S5ZN-CTY8J

16 GB DDR4 2933 MHz ECC registered RDIMM for Dell PowerEdge FC640, M640, MX740c, MX840c and R450 servers

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 16GB

  • 16GB DDR4 2933MHz ECC Registered RDIMM for server reliability
  • CL21 latency at 1.2V for efficient data integrity
  • 288-pin 2Rx8 design fits Dell PowerEdge FC640 M640 MX740c MX840c R450
  • Backward compatible with 2133MHz 2400MHz 2666MHz systems
  • Replaces Dell part numbers AA579532 AA601617 AB003152 SNPTFYHPC/16G SNPTFYHPC/16VXR TFYHP

Server ECC Registered Memory Upgrade

This OWC 16GB DDR4 2933MHz module is built for Dell PowerEdge servers including the FC640, M640, MX740c, MX840c and R450. It operates at 1.2V with a CL21 latency and uses a 288-pin RDIMM form factor. The module is new and validated as a direct replacement for specific Dell part numbers.

Registered ECC Architecture Required

The single specification that determines fit is the registered ECC design; this memory will not work in standard desktop computers and cannot be mixed with unbuffered modules. Backward compatibility covers 2133MHz, 2400MHz and 2666MHz bus speeds. Buyers must confirm their system requires registered ECC RDIMMs before purchase.

Suited For Verified Dell PowerEdge Platforms

This module suits administrators upgrading or repairing the listed Dell PowerEdge models where registered ECC memory is mandatory. It is not for desktop PCs, workstations needing unbuffered DIMMs, or any server outside the validated compatibility list. Systems requiring different capacities, ranks or voltage should look at other modules.

Kohokohdat

  • 16GB DDR4 2933MHz ECC Registered RDIMM for server reliability
  • CL21 latency at 1.2V for efficient data integrity
  • 288-pin 2Rx8 design fits Dell PowerEdge FC640 M640 MX740c MX840c R450
  • Backward compatible with 2133MHz 2400MHz 2666MHz systems
  • Replaces Dell part numbers AA579532 AA601617 AB003152 SNPTFYHPC/16G SNPTFYHPC/16VXR TFYHP

Tekniset tiedot

BrandOWC
Part Number2R9D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell PowerEdge FC640
Dell PowerEdge M640
Dell PowerEdge MX740c
Dell PowerEdge MX840c
Dell PowerEdge R450

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 2933MHz speed mean once the module is installed in a Dell PowerEdge R450?

The module will run at 2933MHz CL21 if the platform supports that data rate; otherwise it will down-clock to 2666MHz, 2400MHz or 2133MHz automatically.

How does the DDR4 PC4-23400 interface limit performance in practice?

PC4-23400 is the JEDEC peak bandwidth rating for 2933MHz DDR4; actual throughput is capped by the server memory controller and the CL21 latency of this module.

What physical slot and form factor does this 288-pin RDIMM need to fit a Dell PowerEdge M640?

It requires a standard 288-pin DDR4 DIMM socket; the registered design and 2Rx8 organisation mean it must go into a server or workstation board that supports ECC registered memory.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.