Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 240-pin DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 1R6T31R4016P 16GB (2x8GB) DDR3L 1600 CL11 ECC RDIMM 1.35V

SKU CH-P1G5-FMZAD

16 GB DDR3L ECC registered kit for Supermicro SuperWorkstation 7037A, 7047AX and 7047GR systems

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands workstation capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • 240-pin RDIMM fits Supermicro 7037A, 7047AX, 7047GR
  • JEDEC and RoHS compliant for reliable upgrades

Target system and purpose

This kit provides 16 GB of DDR3L ECC registered memory in two 8 GB modules for Supermicro SuperWorkstation 7037A, 7047AX and 7047GR systems. It is built for workstations and servers that require error-correcting registered DIMMs and will not operate in standard desktop computers.

Compatibility checks before ordering

Verify that your motherboard accepts 240-pin DDR3L registered ECC DIMMs at 1.35 V and that the CPU and chipset support 1600 MHz operation with CL11 timing. Do not mix these registered modules with unbuffered memory and confirm the system BIOS recognises 1Rx4 rank configuration.

What the kit changes

The matched pair enables dual-channel bandwidth for supported platforms while ECC and registered buffering improve data integrity under sustained loads. Replacing older Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16 extends usable life without requiring a full platform refresh.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands workstation capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw
  • 240-pin RDIMM fits Supermicro 7037A, 7047AX, 7047GR
  • JEDEC and RoHS compliant for reliable upgrades

Tekniset tiedot

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 7037A Series
Supermicro SuperWorkstation 7047AX Series
Supermicro SuperWorkstation 7047GR Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is included in the kit and is anything else needed for installation?

The kit contains two 8 GB DDR3L 1600 CL11 ECC registered RDIMMs for a total of 16 GB. No extra parts are required; the modules install directly into the 240-pin slots of a compatible Supermicro SuperWorkstation.

Which capacity or version should I choose for a Supermicro 7037A, 7047AX or 7047GR workstation?

This 16 GB kit (2 × 8 GB) matches the Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16 listed for those models.

What does the 1600 MHz rating mean once the memory is running in my workstation?

The modules operate at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35 V, delivering the rated bandwidth and error-correcting registered performance for the supported Supermicro SuperWorkstation series.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.