Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 256GB (4x64GB) DDR5 4800 CL40 ECC Registered RDIMM Dell PowerEdge XE9680 memory upgrade

SKU CH-GYQ8-C20A3

A 256 GB kit of four 64 GB DDR5 4800 CL40 ECC registered RDIMMs for Dell PowerEdge XE9680 servers

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes
  • 256 GB total capacity across four 64 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered RDIMM detects and corrects data errors
  • 1 V operation reduces power draw in dense configurations
  • Validated for Dell PowerEdge XE9680 compatibility

256GB DDR5 4800 ECC RDIMM kit

This OWC kit provides 256GB of DDR5 4800 memory in four 64GB registered DIMMs. Each module operates at 1.1V with CL40 latency and 2Rx4 organisation. The kit is validated for the Dell PowerEdge XE9680 server platform.

Replaces lower-capacity or slower DDR5 RDIMMs

Upgrading from smaller registered modules or slower speeds adds total memory bandwidth and capacity for virtualisation, database or compute workloads. The jump is worth it when the XE9680 chassis has free 288-pin slots and the workload benefits from the full 256GB configuration.

Suits XE9680 operators needing maximum registered

This kit fits administrators expanding a Dell PowerEdge XE9680 with JEDEC-standard registered ECC memory. It is not for desktops, workstations requiring unbuffered DIMMs, or systems that only accept load-reduced modules.

Kohokohdat

  • 256 GB total capacity across four 64 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered RDIMM detects and corrects data errors
  • 1 V operation reduces power draw in dense configurations
  • Validated for Dell PowerEdge XE9680 compatibility

Tekniset tiedot

BrandOWC
Part Number4R8D52R4256S
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge XE9680

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 288-pin DDR5 RDIMMs fit the Dell PowerEdge XE9680 memory slots?

Yes, the kit uses the standard 288-pin DDR5 registered DIMM form factor specified for the XE9680, so the modules seat directly in the server's memory slots.

What is the correct installation sequence for the four 64 GB modules in the XE9680?

Populate the memory channels evenly across the CPU sockets, following the Dell slot-population guide for 2Rx4 registered DIMMs to avoid a POST error.

How can I tell if a module has failed and needs replacement?

The server's ECC logging will report correctable or uncorrectable errors tied to a specific DIMM slot; swap the flagged module to restore full redundancy.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.