Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 256GB (8x32GB) DDR4 2133 PC4-17000 CL15 2Rx4 288-pin ECC Registered RDIMM memory upgrade

SKU CH-ZR0V-YK0EB

Eight 32 GB DDR4-2133 ECC registered RDIMMs totalling 256 GB for Cisco UCS M2814 compute cartridges

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 256 GB kit with eight 32 GB modules maximises capacity
  • DDR4 2133 CL15 at 1.2 V balances speed and efficiency
  • 288-pin RDIMM form factor fits Cisco UCS M2814 cartridge
  • Replaces Cisco part numbers for guaranteed compatibility

256GB ECC Registered RDIMM Kit

This OWC kit provides 256GB of DDR4 2133 registered ECC memory across eight 32GB modules. It is built for the Cisco UCS M2814 Compute Cartridge and uses 288-pin RDIMMs with CL15 latency at 1.2V. The 2Rx4 organisation and registered buffer suit server and workstation platforms that require error correction.

Server builders only

This memory suits administrators upgrading or populating a Cisco UCS M2814 Compute Cartridge with validated registered ECC DIMMs. It will not work in standard desktop PCs or consumer motherboards that accept only unbuffered non-ECC modules. Buyers needing unbuffered memory or load-reduced DIMMs must choose a different product type.

256GB across eight 32GB modules

The capacity is delivered as eight 32GB RDIMMs, giving a single part number for a full 256GB configuration. This kit matches Cisco part numbers including 15-103025-01 and UCSMR1X322RUA for direct replacement. Verify the cartridge's maximum supported capacity and slot count before purchase.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 256 GB kit with eight 32 GB modules maximises capacity
  • DDR4 2133 CL15 at 1.2 V balances speed and efficiency
  • 288-pin RDIMM form factor fits Cisco UCS M2814 cartridge
  • Replaces Cisco part numbers for guaranteed compatibility

Tekniset tiedot

BrandOWC
Part Number2R1D42R4256K
Capacity256GB (8 x 32GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS M2814 Compute Cartridge

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does my Cisco UCS M2814 Compute Cartridge need all eight slots populated for this 256GB kit to work?

The kit contains eight 32GB modules; the cartridge must accept eight 288-pin DDR4 ECC registered DIMMs running at 2133 MHz and 1.2V for the full 256GB to be recognised.

Can I keep my existing Cisco UCS memory and add this 2Rx4 CL15 kit alongside it?

This registered ECC memory cannot be mixed with unbuffered or load-reduced DIMMs; all installed modules must be registered ECC of the same rank and voltage to avoid errors.

How do I verify the kit is running at PC4-17000 CL15 after installation?

Check the system BIOS or management console — it should report 2133 MT/s, CAS latency 15, 1.2V and registered ECC status for each of the eight 32GB DIMMs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.