NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
16 GB DDR4 2666 ECC registered RDIMM for servers, workstations and NAS systems
This 16GB DDR4 2666 ECC Registered RDIMM is built for servers, workstations and compatible NAS systems that require registered memory with error correction. It replaces QNAP part numbers RAM-16GDR4ECK0-RD-2666 and RAM-16GDR4ECT0-RD-2666. Buyers needing unbuffered desktop memory or higher-capacity single modules cannot use this product.
Verify that your platform accepts 288-pin DDR4 Registered DIMMs running at 1.2V with CL19 latency and a 2Rx8 organisation. The module is backward compatible with 2133MHz and 2400MHz slots, but it will not work in systems that only support unbuffered or non-ECC memory. Confirm the maximum supported capacity per slot before ordering.
The RDIMM plugs directly into a 288-pin DDR4 server or workstation slot and draws 1.2V, leaving other DIMM channels free for additional registered modules. Because it is registered and ECC, it cannot be mixed with unbuffered memory in the same system. No heat spreader is fitted, so airflow around the module should be adequate for sustained loads.
| Brand | OWC |
|---|---|
| Part Number | 2R6D42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Heat Spreader | No |
The module ships as a single 288-pin DDR4 RDIMM. No brackets, cables or additional hardware are included.
Choose this 2666 CL19 2Rx8 module when your system specifies PC4-21300 ECC registered memory; it also runs at 2400 and 2133 if the platform requires a lower speed.
The DIMM operates at 2666 MT/s with CL19 latency at 1.2 V, providing ECC error correction and registered buffering for stable server and NAS workloads.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?