NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
64 GB DDR4 2933 MHz ECC registered RDIMM for servers, workstations and NAS, CL21 1.2 V with backward compatibility to 2133, 2400 and 2666 MHz
This 64GB DDR4 module is built for servers, workstations and NAS systems that require registered ECC memory. It operates at 1.2V with a CL21 latency and a 2Rx4 rank configuration. Standard desktop computers cannot use this module and it must not be mixed with unbuffered memory.
The single specification that determines compatibility is the registered ECC design on a 288-pin DDR4 form factor. Only platforms that explicitly support registered ECC RDIMMs will accept this module. Systems requiring unbuffered or non-ECC memory are not compatible.
The module delivers 64GB at 2933MHz (PC4-23400) and is backward compatible with 2666MHz, 2400MHz and 2133MHz bus speeds. It comfortably handles high-density virtualisation and large dataset workloads, while capacity limits appear when applications demand more than 64GB per slot.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
The module runs at 2933MHz with CL21 latency, delivering the JEDEC-standard PC4-23400 data rate when the platform drives it at its rated frequency.
As a 288-pin DDR4 ECC Registered DIMM it operates at 1.2V and the registered buffer adds one clock cycle; the platform can clock it down to 2666, 2400 or 2133MHz if required.
It requires a standard 288-pin DDR4 DIMM socket; the module has no heat spreader so it fits in tight server chassis without extra height clearance.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?