Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with gold edge contacts and black memory chips

OWC

OWC 2R9D42R816GB 16GB DDR4 2933MHz ECC Registered RDIMM memory upgrade

SKU CH-NH8Z-GR7VJ

16GB DDR4 2933MHz ECC registered RDIMM for Supermicro X11 server and workstation boards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 16GB

  • ECC registered design protects data integrity in servers
  • 2933 MHz DDR4 speed boosts throughput for demanding workloads
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro X11DSN-TS X11OPi-CPU X11QPH+ X11QPL X11SPA-T
  • Backward compatible with 2133 2400 2666 MHz systems

Compatible Supermicro Server Memory

This 16GB DDR4 2933MHz ECC Registered RDIMM is built for Supermicro motherboards X11DSN-TS, X11OPi-CPU, X11QPH+, X11QPL and X11SPA-T. It targets administrators upgrading workstations, servers or NAS systems that require registered memory with error correction. The module operates at 1.2V with CL21 latency and a 2Rx8 rank configuration. It will not work in standard desktop computers or alongside unbuffered DIMMs.

JEDEC Compliant Registered Design

The registered buffer reduces electrical load on the memory controller, allowing larger total capacities in multi-slot server boards. ECC circuitry detects and corrects single-bit errors to protect data integrity in critical workloads. JEDEC and RoHS compliance ensures a warranty-safe upgrade path for the listed Supermicro platforms. No heat spreader is fitted, so airflow in dense chassis remains unimpeded.

16GB Capacity With Backward Speed Support

Each DIMM provides 16GB of capacity at the rated 2933MHz speed, and will also run at 2666MHz, 2400MHz or 2133MHz when installed in slower systems. This headroom suits virtualisation hosts, database nodes or file servers that benefit from maximum registered DIMM populations. Builders needing unbuffered memory, desktop compatibility or speeds above 2933MHz must choose a different module type.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 2933 MHz DDR4 speed boosts throughput for demanding workloads
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro X11DSN-TS X11OPi-CPU X11QPH+ X11QPL X11SPA-T
  • Backward compatible with 2133 2400 2666 MHz systems

Tekniset tiedot

BrandOWC
Part Number2R9D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DSN-TS
Supermicro Motherboard X11OPi-CPU
Supermicro Motherboard X11QPH+
Supermicro Motherboard X11QPL
Supermicro Motherboard X11SPA-T

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 2Rx8 registered DIMM need any firmware updates or periodic re-seating during its service life?

No firmware updates or scheduled re-seating are required; the module is a standard JEDEC DDR4 2933MHz CL21 1.2V registered ECC DIMM that operates without user maintenance once installed in a compatible Supermicro X11 board.

What electrical or thermal limit will appear first when the module runs continuously at 2933MHz in a populated server chassis?

The 1.2V DDR4 specification and registered buffer keep power draw within JEDEC limits, so the first constraint under sustained load is typically the platform memory-controller thermal budget rather than the DIMM itself.

How much heat and acoustic noise does the bare 288-pin module add when the system runs 24/7?

The module has no heat spreader and no moving parts, so it contributes only the nominal DDR4 1.2V heat load and zero acoustic noise; overall chassis thermals and fan speed remain governed by the server platform design.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.