Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 32GB (2x16GB) DDR3 1333 PC3-10600 CL9 ECC Registered RDIMM Memory Upgrade Kit

SKU CH-9TKZ-0Y0P7

ECC registered DDR3 kit adds 32 GB across two 16 GB modules at 1333 MHz for HP ProLiant G6 and G7 servers

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • 32 GB total capacity for demanding server workloads
  • ECC registered design protects data integrity in critical applications
  • DDR3 1333 CL9 speed matches HP ProLiant G6/G7 specifications
  • 5 V JEDEC-standard voltage ensures broad platform compatibility
  • 240-pin RDIMM form factor fits DL360 DL370 DL380 DL385 DL580 servers

Server Memory Kit

This OWC kit supplies 32 GB of DDR3 ECC registered memory as two 16 GB modules. It is built for HP ProLiant DL360 G7, DL370 G6, DL380 G7, DL385 G7 and DL580 G7 servers that require registered DIMMs. Standard desktop systems cannot use this memory.

DDR3 1333 Registered Limits

The modules run at 1333 MHz with CL9 latency at 1.5 V and use a 240-pin registered interface. Registered DIMMs must not be mixed with unbuffered memory and the platform must support ECC registered operation. JEDEC compliance ensures baseline compatibility with the listed servers.

Pre-Install Checks

Verify that your ProLiant model and generation match the supported list exactly. Confirm the system requires registered ECC DDR3 and that all installed DIMMs share the same capacity, speed and rank configuration. Mismatched modules or an unsupported chassis will prevent the server from booting.

Kohokohdat

  • 32 GB total capacity for demanding server workloads
  • ECC registered design protects data integrity in critical applications
  • DDR3 1333 CL9 speed matches HP ProLiant G6/G7 specifications
  • 5 V JEDEC-standard voltage ensures broad platform compatibility
  • 240-pin RDIMM form factor fits DL360 DL370 DL380 DL385 DL580 servers

Tekniset tiedot

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant DL360 G7
HP ProLiant DL370 G6
HP ProLiant DL380 G7
HP ProLiant DL385 G7
HP ProLiant DL580 G7

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 32 GB kit with two 16 GB modules or look for a single 32 GB stick?

The kit ships as two 16 GB modules; your server’s memory slots and rank limits usually require matched pairs, so the dual-module kit is the correct choice.

What does the 1333 MHz rating actually deliver in an HP ProLiant DL380 G7?

The modules run at DDR3 1333 (PC3-10600) with CL9 latency, giving the maximum supported bandwidth for those G7 servers.

Does the 240-pin registered ECC interface limit capacity or speed in my DL360 G7?

The 240-pin registered ECC design is mandatory for DL360 G7, DL370 G6, DL380 G7, DL385 G7 and DL580 G7; it caps you to DDR3 1333 and requires all slots to use registered modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.