OWC 32GB DDR3L 1600 CL11 4Rx4 240-pin 1.35V ECC RDIMM memory upgrade
- 32GB
- 240-Pin DDR3L ECC R…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB DDR3L 1600 ECC registered dual-rank kit for Supermicro H8QGL, H8SCM, X10DBT, X10QBi and X10QBL motherboards
Capacity 32GB (2 x 16GB)
This 32 GB kit contains two 16 GB DDR3L registered DIMMs built for Supermicro H8QGL, H8SCM, X10DBT, X10QBi and X10QBL motherboards. The modules run at 1600 MT/s with CL11 timing and operate at 1.35 V. They are intended for workstations, servers and NAS systems that require ECC registered memory and will not work in standard desktop boards.
The DDR3L voltage of 1.35 V reduces power draw compared with standard DDR3, helping keep system thermals manageable in dense server chassis. No heat spreader is fitted, so airflow across the 240-pin modules handles cooling. Registered buffering adds minimal latency while maintaining signal integrity under sustained loads.
Each stick uses a 2Rx4 organisation and fits 240-pin DDR3 slots on the listed Supermicro platforms. ECC registration means the memory cannot be mixed with unbuffered modules, so all slots must use the same registered type. The kit frees capacity for virtualisation or large datasets without requiring a platform change.
| Brand | OWC |
|---|---|
| Part Number | 1R6T32R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard H8QGL Series Supermicro Motherboard H8SCM Series Supermicro Motherboard X10DBT Series Supermicro Motherboard X10QBi Series Supermicro Motherboard X10QBL Series |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Align the notch on each 240-pin module with the slot key, press down firmly until both retention clips click, and verify the 1.35 V setting in BIOS — the step often missed is enabling the registered/ECC profile so the server recognises the 2Rx4 organisation.
No scheduled maintenance is required; the modules have no heat spreader and run at 1.35 V, so only a failed DIMM would need replacement, which is covered by the manufacturer's limited lifetime advanced-replacement programme.
The DDR3L 1600 MT/s bus bandwidth and CL11 latency ceiling are reached before thermal throttling, because the 1.35 V modules operate within JEDEC limits without a spreader.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?