OWC 32GB (4x8GB) DDR3L 1600 CL11 ECC RDIMM SuperServer 2027/2028/4027
- 32GB (4 x 8GB)
- 240-Pin DDR3L ECC R…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 32 GB DDR3L 1600 CL11 ECC registered dual-rank kit for Supermicro SuperServer 2027, 2028 and 4027 series
Capacity 32GB (2 x 16GB)
This OWC kit supplies 32GB of DDR3L ECC registered memory in two 16GB modules. It is built for Supermicro SuperServer 2027PR, 2027R, 2027TR, 2028UT and 4027GR systems that require registered DIMMs. Workstation and server administrators can use it to expand capacity in those specific platforms. It will not work in standard desktop computers or with unbuffered memory.
Before ordering, confirm your server motherboard accepts DDR3L 240-pin registered DIMMs at 1.35V. The modules run at 1600MHz with CL11 latency and a 2Rx4 organisation. Mixing them with unbuffered memory is not supported. Check the system documentation for maximum capacity per slot and total population rules.
The kit installs directly into the 240-pin DIMM slots of the listed Supermicro SuperServer series. Registered ECC operation helps maintain data integrity for storage, virtualization or database workloads. Using matched 16GB modules leaves additional slots free for future expansion within the platform limits. No heat spreader is fitted, so airflow clearance follows the chassis design.
| Brand | OWC |
|---|---|
| Part Number | 1R6T32R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro SuperServer 2027PR Series Supermicro SuperServer 2027R Series Supermicro SuperServer 2027TR Series Supermicro SuperServer 2028UT Series Supermicro SuperServer 4027GR Series |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit contains two 16GB DDR3L 1600 CL11 2Rx4 240-pin 1.35V ECC Registered DIMM modules. No extra parts are required for installation in a compatible Supermicro SuperServer.
Select the kit if your server is a Supermicro SuperServer 2027PR, 2027R, 2027TR, 2028UT or 4027GR series. The modules are validated for those specific platforms.
The modules will run at 1600MHz with CL11 latency at 1.35V, providing 32GB of ECC Registered DDR3L capacity across two 16GB DIMMs for supported Supermicro SuperServer series.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?