OWC 8GB DDR4 2666 ECC Registered RDIMM CL19 1Rx4 1.2V server RAM
- 8GB
- 288-Pin DDR4 SDRAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB dual-channel DDR4 ECC registered RDIMM kit running at 2666 MHz CL19 for Synology FS6400 and HD6500 servers
Capacity 32GB (2 x 16GB)
Rank 2Rx4
This kit provides 32GB of DDR4 ECC Registered memory in two 16GB modules. It is built for servers, workstations and NAS systems that require registered DIMMs. The modules run at 2666MHz with CL19 latency at 1.2V. They will not work in standard desktop computers or alongside unbuffered or load-reduced memory.
The 288-pin registered design only fits platforms that support ECC Registered DDR4. Mixing with unbuffered or load-reduced modules is not supported. The memory operates at 2666MHz and is backward compatible with 2133MHz and 2400MHz systems. Buyers who need unbuffered ECC or non-ECC memory for consumer boards cannot use this kit.
Installation follows standard DIMM slot procedures for the target server or NAS. The dual-channel kit should populate matching channel slots for best performance. Common issues include inserting modules into unsupported slot populations or mixing with incompatible memory types. The lack of heat spreaders means airflow across the modules is important in dense chassis.
| Brand | OWC |
|---|---|
| Part Number | 2R6D42R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 32 GB kit provides two matched 16 GB modules (2R6D42R4032P) that run together in dual-channel mode, giving the full bandwidth the FS6400 expects. Single modules would work but lose the paired-channel benefit.
The modules operate at 2666 MT/s with CL19 latency at 1.2 V, providing the peak transfer rate the Synology D4RD-2666-16G and D4ER01-16G slots are designed for. The system will clock them at 2666 MHz unless the platform forces a lower speed.
These are 288-pin ECC registered DDR4 RDIMMs (2Rx4). They must not be mixed with unbuffered or load-reduced ECC modules, and the memory controller will only accept registered ECC DIMMs in the same channel.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?