Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green circuit boards with gold contacts and black chips, no heat spreader

OWC

OWC 32GB (2x16GB) DDR5 5600 CL46 SODIMM for HP Envy 17t-cw100 17t-da000

SKU CH-WWP9-Q66HA

A 32 GB DDR5 SODIMM kit running at 5600 MHz CL46 for HP Envy 17t-cw100 and 17t-da000 laptops

  • Capacity32GB (2 x 16GB)
  • Type262-Pin DDR5 Non-ECC SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.1V
  • ECCNo

Capacity 32GB (2 x 16GB)

  • 32GB dual-channel kit expands multitasking headroom for demanding workloads
  • DDR5 5600 CL46 speed at 1.1V JEDEC standard boosts responsiveness
  • 262-pin SODIMM form factor fits HP Envy 17t-cw100 and 17t-da000 slots
  • Non-ECC unbuffered design ensures broad laptop and all-in-one compatibility
  • OWC lab-tested modules meet OEM specs for reliable long-term operation

System-specific DDR5 SODIMM kit

This 32GB kit contains two 16GB DDR5 5600 CL46 modules built for the HP Envy 17t-cw100 and 17t-da000. It uses 262-pin SODIMM form factor and runs at 1.1V without ECC or buffering. The upgrade targets owners of those exact notebooks who need more memory capacity.

JEDEC DDR5 5600 speed ceiling

The modules operate at the baseline JEDEC DDR5 5600 (PC5-44800) data rate with CL46 latency. This is the standard specification for DDR5 SODIMM memory, so the kit will not exceed 5600 MT/s even if the platform supports higher speeds. Builders needing faster frequencies must look beyond JEDEC-standard parts.

Replaces factory HP 79U71AA memory

The kit replaces the original HP part number 79U71AA and doubles capacity when the laptop shipped with 16GB. The jump is worth it when multitasking with large files or running virtual machines exceeds the original amount. It is not for users whose workloads fit comfortably in the factory configuration.

Kohokohdat

  • 32GB dual-channel kit expands multitasking headroom for demanding workloads
  • DDR5 5600 CL46 speed at 1.1V JEDEC standard boosts responsiveness
  • 262-pin SODIMM form factor fits HP Envy 17t-cw100 and 17t-da000 slots
  • Non-ECC unbuffered design ensures broad laptop and all-in-one compatibility
  • OWC lab-tested modules meet OEM specs for reliable long-term operation

Tekniset tiedot

BrandOWC
Part Number5S6D51R8032P
Capacity32GB (2 x 16GB)
Type262-Pin DDR5 Non-ECC SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP Envy 17t-cw100
HP Envy 17t-da000

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 32 GB kit or a different capacity for my HP Envy 17t-cw100?

This kit provides 32 GB total (2 x 16 GB). It matches the HP part number 79U71AA and is validated for the 17t-cw100 and 17t-da000. If your workload needs more than 32 GB you would need a different kit.

What does the 5600 CL46 rating deliver inside the laptop?

The modules run at 5600 MT/s with a CAS latency of 46 at 1.1 V. That is the JEDEC standard DDR5 speed grade, so the system will operate at its rated frequency without manual tuning.

Will the 262-pin DDR5 SODIMM fit the memory slot in my Envy 17t-da000?

Yes. The kit uses the 262-pin DDR5 SODIMM form factor specified for those models. It is unbuffered, non-ECC, single-rank 1Rx8, and operates at the standard 1.1 V.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.